Table of Contents
Advertisement
LEDs (Front Panel)
Normally ON.
Ready
This blinks during Startup or Shutdown, and turns OFF after the shutdown is
completed.
Normally OFF.
Error
However, it will be On during the power-on self test. Once the self-test is com-
(Amber)
pleted, it will turn OFF. If it stays ON, there is a hardware error.
During a software upgrade, both the Ready and Error LEDs will blink.
Normally OFF.
Disk Full
Blinking indicates the disk is 98% full.
ON indicates the disk is completely full.
Flashes during normal operation, when the Hard Disk is accessed.
Disk
Flashes during normal operation, when data is transmitted or received via the
LAN
LAN.
Buzzer
The buzzer will beep as follows:
1 Beep
2 Beeps
Repeated every 5
seconds
for 1 minute.
3 Beeps
Repeated every 15
seconds
for 3 minutes,
5 Beeps
Repeated every 15
seconds for 3 minutes.
Reset button or power switch is pressed.
Disk Server is a DHCP client, but no DHCP Server responded to the
DHCP client request.
Hard disk usage exceeds 98%.
Disk Server is overheating; automatic shutdown will be performed 3
st
minutes after 1
beep.
3
Advertisement
Table of Contents
