Table of Contents
Advertisement
Main Menu
The Main Menu screen looks like the example below:
The options on the main menu are divided into 2 groups:
•
Configuration
•
Storage Management
Configuration
1. Network
q
IP Address - Set IP Address, Network mask (Subnet Mask), and Gateway.
q
DHCP - Enable and configure the DHCP Server function.
q
DNS - (DNS) Domain Name Server IP Addresses.
q
AppleTalk - Set the AppleTalk Zone. The default value is "*", which allows access by all zones.
q
Microsoft - Configure Microsoft networking; set Workgroup Name and Code Page (alphabet).
2. System
q
General - Set the Disk Server name, date and time.
q
E -Mail - Configure the Disk Server to send E-Mail messages when there is a problem.
q
Printer Port - Configure the Printer. This is helpful but not essential for Windows users.
It is essential for Macintosh users when the printer connected to the Disk Server is NOT a Laser-
Writer or compatible.
q
Shutdown - Shutdown the Disk Server, or create a shutdown schedule.
3. Utilities
These utilities are not required for normal operation.
q
Disk - Check the disk for errors, similar to Scandisk.
q
Log - Check the system log. This is provided only for troubleshooting.
q
Upgrade - Upgrade the Disk Server software.
Figure 6: Web Interface - Main Menu
11
Advertisement
Table of Contents
