Program Pc-Timer; Rs 232 Interface; Interface Data - ALGE-Timing Timy Manual

3 Program PC-Timer

The Timy with program PC-Timer is a very strong combination together with a PC. The Timy
does the exact time keeping and transfers the this to the PC. The PC does only data
processing.
The program PC-Timer has a RS 232 output of the running time every 1/10 second. If the
Timy receives an timing impulse it outputs such data between the running time strings.
The impulse string includes time of day, a ID-number (continuous or input), and timing
channel information.
Otherwise the Timy works as in program Backup.
3.1

RS 232 Interface

3.1.1 Interface Data

RS 232 Interface
38.400 Baud (not adjustable!!!)
8 Data Bit, no Parity Bit, 1 Stop Bit
ASCII Characters
Output of running time in 1/10 second interval, between output of timing impulses.
B####bCxxbHH:MM:SS:zhtq(CR)
HH:MM:SS.z(CR)
B ....................... blank
#### ................. continuous ID number or BIB
Cxx ................... channel (see below, if only 2 characters the third is a blank)
HH .................... hours
: ........................ separation
MM ................... minutes
SS..................... seconds
z........................ 1/10 seconds
h ....................... 1/100 seconds
t ........................ 1/1.000 seconds
q ....................... 1/10.000 seconds
(CR).................. Carriage Return
Channels:
Channel 0 C0
Channel 0M C0M
Channel 1 C1
Channel 1M C1M
Channel 2 C2
Channel 3 C3
Channel 4 C4
Channel 5 C5
Channel 6 C6
Channel 7 C7
Channel 8 C8
Timy
PC-Timer
Impulse Time
Running Time
Precision 1/10.000
Precision 1/100 – manual = keyboard
Precision 1/10.000
Precision 1/100 – manual = keyboard
Precision 1/10.000
Precision 1/10.000
Precision 1/10.000
Precision 1/100
Precision 1/100
Precision 1/100
Precision 1/100
Page 5