Related Manuals for Meyra Netti DYNAMIC AdaptPro
Summary of Contents for Meyra Netti DYNAMIC AdaptPro
- Page 1 III HD DYNAMIC AdaptPro GMDN 41620 Patent EP 2836184 User Manual This product conforms to MDR 2017/745/EU for medical products. UM0134 UK 2021-11...
-
Page 2: Table Of Contents
CONTENTS 1. INTRODUCTION AREAS OF USE/INDICATIONS FOR NETTI DYNAMIC ADAPTPRO CONTRA INDICATIONS QUALITY AND DURABILITY THE ENVIRONMENT AND WASTE DISPOSAL INFORMATION FOR RE-USE ABOUT THIS MANUAL VITAL MEASURES 2. QUICK REFERENCE 3. DESCRIPTION* INFORMATION ABOUT NETTI DYNAMIC ADAPTPRO SYSTEM OW THE NETTI ADAPTPRO FRAME WORKS 4. - Page 3 ABDUCTION BLOCK 5.13 THIGH SUPPORT 5.14 TABLE 6. EVERYDAY USE OF NETTI DYNAMIC ADAPTPRO SEAT UNIT ANGLE - TILT BACKREST ANGLE - RECLINE KEY WORDS REGARDING TILT AND RECLINE OF COMFORT WHEELCHAIRS DECREASE THE POSSIBILITY OF SLIDING, SHEAR AND PRESSURE SORES:...
- Page 4 11. TROUBLESHOOTING 12. TESTS & WARRANTY 12.1 TESTS 12.2 WARRANTY 12.3 CLAIM 12.4 NETTI CUSTOMISED / INDIVIDUAL ADAPTATIONS 12.5 COMBINATIONS WITH OTHER PRODUCTS 12.6 SERVICE AND REPAIR 13. MEASUREMENTS & WEIGHT Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11...
- Page 5 Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com...
-
Page 6: Introduction
It has an adjustable seat and back angle, thus facilitating for the user change of position, mobilisation or posture correction (stabilization). Netti Dynamic AdaptPro is a tilt- and back recline wheelchair that allows for controlled «Open Kinetic Chain» (OK-C) movements for the user when the dynamic functions are activated. -
Page 7: Areas Of Use/Indications For Netti Dynamic Adaptpro
1.1 AREAS OF USE/INDICATIONS FOR 1.2 CONTRA INDICATIONS NETTI DYNAMIC ADAPTPRO Netti Dynamic AdaptPro does also function as a Netti Dynamic AdaptPro is a tilt and recline wheelchair static wheelchair when the Dynamic functions are for wheeled transport for partially or fully immobile locked. -
Page 8: Information For Re-Use
My-Netti.com with visibility challenges) please find our user manual on our web page: www.My-Netti.com - manuals - user manual Netti Dynamic AdaptPro. Latest user manual updates, product safety notes, addresses and other product information like recalls etc. will be published on our web page. -
Page 9: Vital Measures
610 mm backrest height including back cushion. Front location of arm support 408 mm 450 mm structure ** For Netti Dynamic AdaptPro with seat width Push rim diameter 540 mm 540 mm 500 mm and more, the overall width exceeds... -
Page 10: Quick Reference
The content of this page is a summary of the whole manual. It gives you a brief introduction to the use create a warm surface. and care of the Netti Dynamic AdaptPro wheelchair. Surface temperature of metal parts in frame structure might increase when exposed to The quick reference is not a replacement for direct sunlight. -
Page 11: Description
Push bow Head support height handle. Be aware that specifications may vary between countries. If any of these parts are missing, please contact your dealer. For complete information, please contact your dealer. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 12: Information About Netti Dynamic Adaptpro System
3.1 INFORMATION ABOUT NETTI DYNAMIC ADAPTPRO SYSTEM Netti Dynamic AdaptPro is an advanced mobility aid incorporating 2 Netti patented solutions: n advanced AdaptPro frame with large tilt span n advanced dynamic system. Tilt range: The patented Netti AdaptPro wheelchair frame allows for extensive tilt range from 5°... - Page 13 Foot movements n Ankle movements n Knee movements n Hip movements n Pelvic movements n Back movements n Head movements The Illustration show all dynamic movements with max 30 degree tilt. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com...
-
Page 14: Ow The Netti Adaptpro Frame Works
Tilt range: The patented Netti AdaptPro wheelchair frame allows for extensive tilt range. On the Netti Dynamic AdaptPro it is set from 5° forwards to 30° backwards. THE TILT FUNCTION is operated from the tilt handle at the left side on push bow. - Page 15 The rotating handle returns to where the indicator line aligns with the lock symbol. • The recline angle is locked. Recline / dynamic gas cylinder adjustments see chapter 5.6 Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com...
-
Page 16: Features Of Netti Dynamic Adaptpro
4. FEATURES OF NETTI Dynamic AdaptPro STANDARD OPTIONS /ACCESSORIES SEAT SEAT • Netti Sit cushion Cushion with good pressure • Solid seat plate distributing properties • Trays & reading stand for trays(Se e chapter 5) • Tilt 0° to +30°... -
Page 17: Accessories
Offers a soft base for Grandis extension piece the arm resting on the Required for mounting of any tray. Grandis leg supports Wedge Increases side support. Lumbar support Increases lumbar curvature. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... - Page 18 Wide: 385 x 58 mm Support E adjustable side supports Side support Correction Meant for correction of Support F with cheek/chin unfavourable postures in the support band upper trunk. Cloth protector Support Relaxo Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11...
- Page 19 45 psi. Wheel frame extender 60 mm rearward position for the main wheels. Wheel frame extender for rearward and height adjustment Front wheels / castors available in sizes: 6” and 7” Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com...
-
Page 20: Assembling And Adjusting
The extension pieces where the leg supports are done in the possible positions by standard mounted, can in addition be positioned more equipment, the adjustments will not exceed forward for adjusting to unequal long legs. safe limits. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 21: Wheels Assembling
- self drive or attendant drive and seat height adjustments. Both 24” wheels and16” wheels have drum brake. Choice of wheel size and position requires adjustments of the front castor stem angle. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 22: Front Fork
If the depth has been increased you need one pair of additional cover. If the depth has bee reduced you have one cover pair in spare. • Repeat on the other side. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 23: Correct Frame Angle
Adjust the nut backwards towards the axle head if the axle does not click in . Adjust the nut forwards if the axle sits loose when inserted through wheel and brake. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 24: Drum Brake Adjustment
• To release the brakes: lift the handles up. The user brakes cannot be used as running brakes. Do not leave the user in the wheelchair without activating the parking brake. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 25: Seat Assembling - Wheelchair Seat Height
30 mm. The risk for tipping increases when the main wheel is moved forward in the main wheel bracket. Check the position of anti tip. Readjust the brakes. (See chapter 5.3.6). Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 26: Seat Height At The Front
By adjusting the seat depth, the chair balance and the 450 mm 480 mm 430 - 505 driving characteristics may change. A well balanced chair is easy to drive without easily tipping backwards. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 27: Seat Depth - Adjusting At The Rear
2 pcs 5 mm Allen key Seat plate depth scale On the seat plate a scale is showing which seat depth has been chosen. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 28: Seat Depth - Adjusting At The Seat Plate Position In The Front
1 pcs 5 mm Allen key By using the Velcro adjustment straps in the chair-back you can gain some mm on the depth. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 29: Dynamic Seat Plate Lock
The illustration show max swung up seat plate. A seat plate limiter stops the upward movement. When a Netti Dynamic AdaptPro is used as a seat in a car, the seat plate swing-up-movement should be locked to reduce the dynamic movement range in the limited space. -
Page 30: Chair Back Assembling And Positioning
The cushion covers are washable and thereby reusable. Follow the instruction on the back of the cushion for correct maintenance and washing of the cushion. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 31: Back Extender
5.5.3 BACK EXTENDER The back height of Netti Dynamic AdaptPro is 510mm measured from the seat plate to the top of the back Velcro. For users taller than ca 1.85 m it may be advantageous to have a higher back for better support around the shoulder region. -
Page 32: Netti Dynamic Free Movement Back Support Cylinder
If you lock the free cylinder, it is important that the user is correct positioned and not sliding forward to prevent damage on the leg support. 5.6.3 NETTI DYNAMIC ADAPTPRO ASSESSMENT Of DYNAMIC BACK SUPPORT GAS CYLINDER FORCES, SUITING USER STRENGTH AND... - Page 33 Please contact your dealer if you need other strength. The recline angle range is approximately 30° for all wheelchair-models with free movement cylinder. Netti Dynamic AdaptPro recline solutions have a starting angle of approximately. 87° Model: Netti Dynamic AdaptPro Language: English Version: 2021-11...
-
Page 34: Change Of Recline Gas Cylinder
• Adjust the wires. • Fold up the chair-back and test if the solution suits the user strength, and bring the user back to upright position when his/her extension movement ends.. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 35: Change Of Tilt Gas Cylinder
5.6.5 CHANGE OF TILT GAS CYLINDER The Netti Dynamic AdaptPro is equipped with 2 tilt gas cylinders.. The upper cylinder is the one taking much load. The lower is supportive to the upper cylinder. -
Page 36: Netti Dynamic Head Support Assembling And Positioning
5.7 NETTI DYNAMIC HEAD SUPPORT ASSEMBLING AND POSITIONING 5.7.1 NETTI DYNAMIC C HEAD SUPPORT The Netti Dynamic AdaptPro is as a standard equipped with a Netti dynamic head support. The head support follows the backward movement of the head when the head is pressed against it. -
Page 37: Arm Supports Adjusting
• Pull the red button under the armrest pad and move the pad backwards and forwards as you like it. It clicks into position once you let go of the button. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 38: Arm Supports Handling
MOUNTING, POSITIONING AND ADJUSTMENTS OF PELVIC SUPPORTS AND SUPPORTIVE HARNESSES Netti Dynamic AdaptPro is prepared for mounting several different types of pelvic stabilizer and supportive harnesses, each type developed to give the user the best stabilization support depending on... - Page 39 - follow the numbers. Model: Netti Dynamic AdaptPro info@solidworks.com Language: English Version: 2021-11 My-Netti.com...
- Page 40 230 mm Ankle-Huggers M 44865 Large 220- For complete and updated Ankle-Huggers L 290 mm overview, please see our 44904 Extra large Ankle-Huggers XL 280-330 mm homepage – product catalogue – www.My-Netti.com Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11...
-
Page 41: Leg Supports
5.10 LEG SUPPORTS Netti Dynamic AdaptPro comes as a standard with Netti DUAL Dynamic leg support. The chair can also be equipped with following alternative leg supports: • Angle adjustable leg support standard • Electrical leg support • Grandis leg support •... -
Page 42: Leg Support Height And Length Adjustments
Slightly tilting the seating unit may help. If not sufficient, the chair height must be adjusted as described in this user manual chapter 5.4 Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 43: Calf Supports Height And Depth Adjustments
They should in addition to supporting the calf also help prevent the feet sliding backwards from the foot-board. 2 pcs 13 mm open end spanner Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com info@solidworks.com... -
Page 44: Foot-Board Angle Adjustment
The foot-board lock is removed from the length profile where it normally sits - and mounted to the extension bracket. The extension bracket is mounted to the length profile where the lock was sitting. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11 info@solidworks.com... - Page 45 All mounting illustrations are showed for Netti Dynamic Parallel. The mounting procedure for Netti Dynamic Dual is similar. info@solidworks.com Extension platform kit for Dual leg support: 82940 and 82941. Model: Netti Dynamic AdaptPro info@solidworks.com Language: English Version: 2021-11 My-Netti.com...
-
Page 46: Locking The Netti Dynamic Dual Leg Support
The lock is closed by turning the outer ring 90 degrees forward! LOCK The foot-board lock MUST always be closed when the chair is occupied. info@solidworks.com Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 47: Angle Adjustable Leg Supports
• Loosen the screw on the outside of the foot plate - see picture - with an Allen key. • Tilt the foot plate to required angle and tighten the screw. 5 mm Allen key Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... - Page 48 • Lift the right foot plate up. • Lift the leg support in the knee joint slightly up. • Swing it out wards • Lift it up. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11...
-
Page 49: Grandis Leg Supports
GRANDIS FOOT PLATE ANGLE ADJUSTMENT: • Unfix the 2 screws as shown below using an 5 mm info@solidworks.com Allen key. • Adjust the foot plate to the required angle and tighten the screws. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com info@solidworks.com... - Page 50 To adjust in depth of the calf pad, loosen the screw holding the calf support and slide it to required position before fixing the screw again. 5 mm Allen key info@solidworks.com Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11...
-
Page 51: Grandis Fixed Leg Supports
• Loosen the 2 screws on the outside of the foot plate and rotate to desired angle before fixing. • Details are also shown in chapter 5.10.9 5 mm Allen key Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 52: Side Supports
4 mm Allen key 5.13 THIGH SUPPORT Netti AdaptPro seat plate is prepared for mounting thigh support to the top of it. They are fixed similar as the abduction block. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 53: Table
Never place any items that may cause harm or can brake on the table when the dynamic functions are not locked and the arm supports are not horizontal. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 54: Everyday Use Of Netti Dynamic Adaptpro 5
RECLINE OF COMFORT WHEELCHAIRS Max user weight for Netti Dynamic AdaptPro is 135 Tilt and recline are the basic benefits of a comfort wheelchair. It allows for varying seating positions... -
Page 55: Operating Recline: Reclining The Chair Back
If the recline function is used during a transfer has been chosen. Netti Dynamic AdaptPro can be situation or other situations, it is very important that for- ward tilted -5° -and backwards tilted +30°. A... -
Page 56: Practice The Use Of The Dynamic System Together With The User
Practice using the recline function by changing the back angle only. This is helpful when using a hoist to transfer the user in and out of the chair. Please return to dynamic back function after transfer. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 57: Transfer To And From The Wheelchair
• Option: Swing away the arm supports to get closer to the patient and / or remove the head support. • Replace the components when the transfer is finished. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 58: Daily Attendant Handling
• Tip the wheelchair. 6.8.3 BRAKES Netti Dynamic AdaptPro is equipped with drum brakes that can be operated both with the brake handles on the push bar and from the parking / user brake in front of the main wheels. -
Page 59: Arm Supports
Netti AdaptPro has a easy to used arm-support- pad depth. Pull the red central knob under the arm pad and slide the arm pad forwards or backwards to get the best arm support position for the user. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 60: Head Support-Mounting
6.8.5 HEAD SUPPORT-MOUNTING Netti Dynamic AdaptPro can be equipped with Netti Dynamic head support. The head support follows the backwards extension movement of the neck. This is beneficial both for users with involuntary movements and users nodding or banging the head. -
Page 61: Leg Support Foot Board
This stops dynamic movements except rotation of the foot board. Always lock the dynamic function of the leg supports when the user sits in the chair and it is used as a seat in a car. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 62: Belts And Harnesses
Always use the mounted belts, harnesses and ankle huggers to secure the user when sitting in the Netti Dynamic AdaptPro. Netti Dynamic AdaptPro is prepared for mounting several different types of pelvic stabilizer and supportive harnesses, each type developed to give... -
Page 63: Transport
ISO 7176-19:2008 stating it is suitable to be used as a seat in a vehicle. REMOVE ACCESSORIES Before using the Netti Dynamic AdaptPro as a seat in Netti Dynamic AdaptPro has been crash tested a car, be sure to remove and secure all auxiliary parts without any power assistant device etc. -
Page 64: Folding For Transport
Netti Dynamic AdaptPro is configured with dynamic function which are activated with gas spring(s). If the user is 1.85 m or longer, the back... -
Page 65: Manoeuvring
EMERGENCY ESCAPE ROUTES: to be driven long distances. By swinging the push bow up, the attendant can drive for Netti Dynamic AdaptPro with seat width 500 shorter distances like transferring from room to mm and more, has an overall width exceeding room. -
Page 66: Driving Techniques - Step Up
• Pull the wheelchair up by the push handles onto the step and go backwards long enough to put down the front castors on the step. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 67: Driving Techniques - Slope
Control the speed of the chair by clutching the push rims. Do not use the brakes. Do not lift the wheelchair holding onto the push-bow, leg-, arm- or head supports. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 68: Transfer
For users with forceful involuntary movements it is possible to mount counterweights on the wheel- frame front. The point of balance can also be changed by adjusting the seat angle and/or angle of backrest. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 69: Lifting The Wheelchair
To avoid this risk, we recommend spoke protectors as accessory. If you want/need to change push rims or increase/decrease the distance between the push rims and the wheel, please contact your dealer. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 70: Maintenance
As a rule of thumb, use oil on movable parts Clean cushions and covers according to and all bearings. Alu Rehab recommends use instructions printed on cushions. of ordinary bicycle oil. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 71: Long Term Storing
If defects or damages occur, please contact your dealer. Original paint for repair of scratched, can be ordered from Alu Rehab. Model: Netti Dynamic AdaptPro Language: English Version: 2021-11 My-Netti.com... -
Page 72: Troubleshooting
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti Dynamic AdaptPro My-Netti.com Language: English Version: 2021-11... -
Page 73: Tests & Warranty
In such cases, MAXIMUM USER WEIGHT: this warranty shall be considered null and void. 135 kg for Netti Dynamic AdaptPro with seat width 350-500 mm This warranty is only valid when the user use, maintain and handle the wheelchairs as described in this user manual. -
Page 74: Netti Customised / Individual Adaptations
Alu Rehabs approved Substitutions or alterations of components from dealers, the warranty given by Alu Rehab A.S Norway third part suppliers to Netti Dynamic AdaptPro will not be valid. requires the risk evaluation and acceptance of the... -
Page 75: Measurements & Weight
The cushions are not included. Recommended tyre pressure for pneumatic drive wheel tyres: 40–45 PSI. Max. user weight for Netti Dynamic AdaptPro with seat width up to 500 mm 135 kg. When used as seat in a car: Max. user weight 135kg. - Page 76 Norway post@My-Netti.com T: +47 51 78 62 20 my-netti.no Distributor Distributor Distributeur Alu Rehab ApS Meyra GmbH Meyra Netti SAS Kløftehøj 8 Meyra-Ring 2 11 rue du Bois du Pont DK-8680 Ry D-32689 Kalletal Lot 2, ZI Béthunes Denmark Germany 95310 St Ouen L’Aumône...