Subscribe to Our Youtube Channel
Related Manuals for Meyra Netti Dynamic
Summary of Contents for Meyra Netti Dynamic
- Page 1 III HD DYNAMIC SYSTEM Patent EP 2836184 User Manual and mounting description This product conforms to MDR 2017/745/EU for medical products. UM0143 UK 2024-10...
-
Page 2: Table Of Contents
NETTI DYNAMIC FOOTBOARD – ANGLE ADJUSTMENT 3.13 NETTI DYNAMIC LEG SUPPORTS FOR DIFFERENT LEG LENGTHS ONE-SIDED FOOTBOARD - DEPTH ADJUSTMENT 3.14 CHAIR WIDTHS, HEIGHTS AND FABRIC FOR NETTI DYNAMIC DUAL LEG SUPPORT: 3.15 CHAIR BACK HEIGHT 3.16 NETTI DYNAMIC HEAD SUPPORT 3.17... - Page 3 5. EVERYDAY USE OF THE NETTI DYNAMIC SYSTEM TRANSFER TO / FROM THE CHAIR USING A PATIENT HOIST ATTENDANT USE: PUSH BOWS AND PUSH HANDLES ANTI-TIPS BRAKES ARM SUPPORT LEG SUPPORTS FOOT BOARD LOCK HEEL STRAPS 5.10 THE LEG SUPPORT ANGLE 5.11...
-
Page 4: Introduction
In order to avoid damages while using the Netti What is Netti Dynamic Seating? Dynamic System please study this manual carefully Netti Dynamic System is a tilt and recline system before starting to use the chair. A wheelchair with which allows controlled Open Kinetic Chain (OK-C) dynamic system must be adjusted and operated movements of the user in a wheelchair. - Page 5 Netti III XHD (max sw 600 mm). If your patient / user exhibits involuntary movements of the head and trunk only, the Netti Dynamic recline system in combination with the Netti Dynamic head support could be considered, these will be two dynamic components added to a Netti III, Netti III HD, Netti 4U CED(S), Netti 4U Base, Netti V, Netti S, Netti AdaptPro, Netti III XHD ( max sw 600 mm).
-
Page 6: Intended Use
• when the client may not be able to return to a neutral position. • when the client weight is higher than 135 kg. • Max user weight is 135 kg. For Netti Dynamic S - max user weigh: 75 kg Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... -
Page 7: Netti Dynamic System
USER REQUIREMENTS * If you choose a Netti III model, we recommend the reinforced frames Netti III HD due to hard use and Netti Dynamic III HD with Dynamic System with a info@solidworks.com uncontrollable muscle movements of the user. In pelvic stabilizer and ankle huggers order to get the right model, width, heights etc. -
Page 8: Netti Dynamic System Functions
2. NETTI DYNAMIC SYSTEM FUNCTIONS The dynamic elements moved into max extension applied to a Netti III wheelchair. Headrest pushed backwards Back in max recline Seat lifted Leg supports lifted and extended Tilted foot plate Model: Netti Dynamic System My-Netti.com... -
Page 9: Exploded View Of Netti Dynamic System
2.1 EXPLODED VIEW OF NETTI DYNAMIC SYSTEM Netti Dynamic head support Netti Dynamic seat plate Netti Dynamic System leg support Long anti-tippers Netti Dynamic back gas spring Frame extender Armrest with finger protection Model: Netti Dynamic System Language: English Version: 2024-10... -
Page 10: Netti Dynamic Leg Support Features
2.2 NETTI DYNAMIC LEG SUPPORT FEATURES Netti Dynamic leg support is especial designed for providing open kinetic chain for users who are pushing with uneven force with their lower extremities. Unilateral extension of the hip; (left or right part of the leg support goes down). -
Page 11: Netti Dynamic Leg Support Functional Overview
2.3 NETTI DYNAMIC LEG SUPPORT FUNCTIONAL OVERVIEW The Netti Dynamic leg supports allow controlled Open Kinetic Chain (OK-C) movements of the lower extremities of the user. Unlike static wheelchairs, the user’s distal segments are supported but can move. This helps to gain... -
Page 12: Leg Support Adjustment
The adjustment should be carried out by a trained professional The Netti Dynamic leg support product range fits to different seat widths. Available sizes: see table on page 23. NETTI DYNAMIC DUAL LEG SUPPORT Netti Dynamic leg support is offered in two different lengths. -
Page 13: Adjusting The Dynamic System Chair To The User
• Seat height is to be seen together with the leg supports. • Leg supports need to be adjusted to accommodate the seat height. Please, see the illustrations on next page regarding seat depth adjustments. Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com info@solidworks.com... -
Page 14: Seat Depth Adjustments In The Back
– while the user at the same time is having good back support of his lower back – also when the leg support angle is changed. Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... -
Page 15: Seat Angle Adjustment
Can be adjusted at any time by the use of the tilt handles. 3.5 SEAT PLATE ADJUSTMENT: The Netti Dynamic System seat plate is pivoted in the front of the seat and the pelvic stabilizer is fixed to the seat plate. This allows... -
Page 16: Leg Support Height Adjustment
Consider wheelchair balance. info@solidworks.com info@solidworks.com Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... -
Page 17: Footboard Height Adjustment
Twist the calf pads to an angle giving support info@solidworks.com info@solidworks.com for the leg when the foot support is angled. The calf pads can swing freely to follow the movements and adjust to the user’s leg position. Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com... -
Page 18: Calf Support Depth Adjustment
Locking the leg support may be required if sudden extension maylead the leg supports to hit persons or surrounding. It is also required if the wheelchair is being used as a seat in a car. info@solidworks.com Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... -
Page 19: Netti Dynamic Footboard - Angle Adjustment
3.12 NETTI DYNAMIC FOOTBOARD – ANGLE ADJUSTMENT Loosen the M8 screw on the left foot board with • 6 mm Allen key. This allows the footboard to rotate. Choose a footboard angle to accommodate the user’s foot angle. • Fix the screws tightly so that the footboard does not move. -
Page 20: Netti Dynamic Leg Supports For Different Leg Lengths
3.13 NETTI DYNAMIC LEG SUPPORTS FOR DIFFERENT LEG LENGTHS ONE-SIDED FOOTBOARD DEPTH ADJUSTMENT By uneven leg length or leg position: The leg support and footboard depth can be adjusted to compensate for this by the use of extensions pieces and extension bracket on the right leg support. - Page 21 – suiting a user with longer right leg. Mounting illustrations for one-sided footboard depth adjustments are showed for Netti Dynamic info@solidworks.com PARALLEL leg support. The mounting procedure for one-sided footboard depth adjustment for Netti Dynamic DUAL leg support is similar.
-
Page 22: Chair Widths, Heights And Fabric For Netti Dynamic Dual Leg Support
3.14 CHAIR WIDTHS, HEIGHTS AND FABRIC FOR NETTI DYNAMIC DUAL LEG SUPPORT: LEG SUPPORT ADJ. R LEG SUPPORT ADJ. L CHAIR WIDTH FOOTBOARD *A CALF PAD ITEM NO. 3D FABRIC 3D FABRIC (HEIGHT 20 CM) IN MM 82856 82857 82872... -
Page 23: Chair Back Height
3.16 NETTI DYNAMIC HEAD SUPPORT The Netti Dynamic System is equipped with a dynamic head support. The head support follows the extension dworks.com... -
Page 24: Arm Support Position
3.18 MOUNTING, POSITIONING AND ADJUSTMENTS OF PELVIC SUPPORTS AND SUPPORTIVE HARNESSES Netti Dynamic System can be equipped with several different types of pelvic stabilizer and supportive harnesses each type developed to give the user the best stabilization support depending on the conditions: •... -
Page 25: Ankle Huggers And Shoe Shells
3rd parties @solidworks.com because the table is statically fixed to the armrests while the movements of the user are dynamic. Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com... -
Page 26: Assessment And Choice Of Netti Dynamic Back Support Gas Spring
Netti Dynamic System wheelchair with Netti Dynamic 15° movement back support spring is not approved for being used as a seat in a vehicle. -
Page 27: Option 2: Netti Dynamic Free Movement
NETTI DYNAMIC FREE MOVEMENT GAS SPRING – ACTIVATED THE FREE MOVEMENT BACK SUPPORT SPRING The dynamic back solution of Netti Dynamic System allows the back support to move backwards to is activated by pulling the recline handle. full recline, giving full support during extension movement. -
Page 28: How To Assess And Choose The Right Power Of The Dynamic Back Support Gas Spring
If the gas spring is too weak, the user will not be lifted back to his / hers original seating position after an extension of the upper body part. Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... -
Page 29: Overview Of Available Dynamic Recline Gas Springs And Seat Widths
15° spring 160 N – 82410 KIT 15° spring 4.3 TECHNICAL SPECIFICATION AND OPTIONS OF NETTI DYNAMIC BACK SUPPORT GAS SPRINGS FREE MOVEMENT BACK SUPPORT GAS SPRING: Combination of seat depths, front bracket hole and spring head – short and long. - Page 30 B: with second hole on spring hinge B: with third hole on spring hinge B: with fourth hole on spring hinge STARTING RECLINE ANGLE FOR NETTI DYNAMIC CED / BASE FRONT SPRING BRACKET HOLE (A–B–C). A IS SEAT DEPTH (SD)
-
Page 31: Everyday Use Of The Netti Dynamic System
DYNAMIC SYSTEM IS 136 KG • Make sure the anti-tips are turned downwards. FOR NETTI DYNAMIC S IS 75 KG After the wheelchair has been correctly adjusted to • Remove the leg support and revolve / remove the the user described in the previous chapters, you as arm support on the side of the transfer. -
Page 32: Attendant Use: Push Bows And Push Handles
5.4 ANTI-TIPS Always use anti-tips to ensure a safe and stable wheelchair. When the “OK-C” Netti Dynamic System parts are active, it is essential to use the anti-tips at all times. • The anti-tips are pulled and swung away when passing obstacles etc. -
Page 33: Arm Support
Please, see the illustration of a chair with swing-away arm support. 5.7 LEG SUPPORTS Mounting Netti Dynamic leg supports: • Position the vertical bolt over the leg support bracet. • Turn the leg support ca. 30 degree outwards and info@solidworks.com... -
Page 34: Heel Straps
Heel straps are useful when involuntary movements dworks.com let the feet slide off the foot board. 5.10 THE LEG SUPPORT ANGLE The Netti Dynamic System leg support angle can be locked by tightening the red wheel on the outside of the leg support. See illustration: 5.11 HARNESSES... -
Page 35: Recommendations Regarding Tilt And Recline
The care giver is also able to communicate with the user before the tilt or recline function is used. The user will feel more safe when he/she is aware that the tilt or recline function is going to be used. Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com... -
Page 36: Operating Tilt Handle: Tilting The Seating Unit
Wherever you let the handle loose, the seating unit A wheelchair with Netti Dynamic 15° movement gsa will stay in this position. spring has a 15° flexing wherever the recline angle is positioned. -
Page 37: Operating Recline Handle: Reclining The Chair Back
Wherever you let the handle loose, the chair back will stay fixed and locked. Wheelchair with Netti Dynamic 15° movement back support gas spring will however still allow for 15° degrees flexing. The illustration shows a recline handle position for a locked back. -
Page 38: Changing The Chair-Back Gas Spring
• Pull the gas spring hinge outwards. There may be different styles to the spring hinges, but the function is the same. info@solidworks.com See the illustration below showing the spring hinge in orange and the spring in green. info@solidworks.com Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10... - Page 39 • Remove the old gas spring. Use a 17 mm open info@solidworks.com end spanner to open the nut C. • Connect the gas spring locking head A, if not mounted, to the new spring. info@solidworks.com info@solidworks.com Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com...
- Page 40 TABLE FOR GAS SPRINGS info@solidworks.com MODEL SUITING USER STRENGTH AND WEIGHTS ON NEXT PAGE. Model: Netti Dynamic System My-Netti.com Language: English Version: 2024-10...
-
Page 41: Netti Dynamic Components And Accessories
8. NETTI DYNAMIC COMPONENTS AND ACCESSORIES COMPONENTS AND ACCESSORIES DESCRIPTION PICTURES FOR NETTI DYNAMIC SYSTEM HEAD SUPPORTS Head Support Dynamic Flexes Backwards Head Support lock SEAT PLATE Please study Seat widths: the spare part 35 – 38 – catalogue Seat Plate - fixed 40 –... - Page 42 COMPONENTS AND ACCESSORIES DESCRIPTION PICTURES FOR NETTI DYNAMIC SYSTEM LEG SUPPORTS Please study the spare part Allows for catalogue Netti Dynamic DUAL Leg Support uneven forces on our from the legs homepage for all alternatives BELTS info@solidworks.com Seat widths: H-Belt Adaptor Kit – Mini...
-
Page 43: Lower Extremities
COMPONENTS AND ACCESSORIES DESCRIPTION PICTURES FOR NETTI DYNAMIC SYSTEM HARNESSES Medium Stayflex Vest w/o zipper Stayflex Vest w/o zipper Large Medium Pivotfit M Unisex Large Pivotfit L Unisex LOWER EXTREMITIES Medium Calf Support Large Calf Support Small Ankle Huggers S 17 –... -
Page 44: Transport
ISO 7176-19. Max user weight when a wheelchair with Dynamic System is used as a seat in a vehicle: 135 kg. Netti Dynamic S has max user weight 75 kg. The Netti Dynamic System functions has to be locked when... -
Page 45: Lifting The Wheelchair
Manual for the wheelchairs where the • Keep a sturdy, well balanced stand lifting from Netti Dynamic System has been adapted to. your legs. • Never lift alone. • Never lift a wheelchair in its leg support or arm supports. -
Page 46: Tests & Warranty
Netti Dynamic System when the Netti Dynamic System or parts are mounted and adjusted for the Medical Device user under supervision of a Netti Dynamic System certified person. Netti wheelchair with Dynamic System has been tested according to EN 12183 at an accredited test laboratorium in Germany. - Page 47 Model: Netti Dynamic System Language: English Version: 2024-10 My-Netti.com...
- Page 48 Designed in Norway Manufacturer: Distributor Alu Rehab AS Alu Rehab ApS Bedriftsvegen 23 Kløftehøj 8 N-4353 Klepp Stasjon DK-8680 Ry Norway Denmark post.klepp@eyragroup.com info.ry@meyragroup.com T: +47 51 78 62 20 T: +45 87 88 73 00 www.my-netti.com F: +45 87 88 73 19 www.my-netti.dk My-Netti.com...
Need help?
Do you have a question about the Netti Dynamic and is the answer not in the manual?
Questions and answers