Dimensional Drawings - Tascam CA-XLR2d Reference Manual

o Using NiMH battery (eneloop)
Use conditions
Condenser mic connected to INPUT 1
jack
Phantom power used (2 mA)
Condenser mic connected to INPUT 1
jack
Phantom power used (5mA)
Dynamic mics connected to INPUT 1 and
INPUT 2 jacks
Phantom power unused
TASCAM TM-200SG connected to INPUT
1 jack
Phantom power used
Other unit settings: input volume centered, ATT switch at
"0dB", LEVEL switch at "MAN", LIMITER
switch at "OFF"
o Using lithium-ion batteries (Energizer Ultimate Lithium)
Use conditions
Condenser mic connected to INPUT 1
jack
Phantom power used (2 mA)
Condenser mic connected to INPUT 1
jack
Phantom power used (5mA)
Dynamic mics connected to INPUT 1 and
INPUT 2 jacks
Phantom power unused
TASCAM TM-200SG connected to INPUT
1 jack
Phantom power used
Other unit settings: input volume centered, ATT switch at
"0dB", LEVEL switch at "MAN", LIMITER
switch at "OFF"
ATTENTION
When using phantom power, the operation time might be
reduced depending on the mics being used.
Dimensions / Weight
CA-XLR2d-C:
88.2mm (W) x 119.1mm (H) x 110.0 mm (D) / 341 g
(not including protrusions, mic holder attached,
battery holder not attached)
CA-XLR2d-F:
88.2mm (W) x 119.1mm (H) x 110.0 mm (D) / 331 g
(not including protrusions, mic holder attached,
battery holder not attached)
CA-XLR2d-AN:
88.2mm (W) x 119.1mm (H) x 110.0 mm (D) / 357 g
(not including protrusions or batteries, mic holder
attached, battery holder attached)
Operating temperature range
0 - 40°C (32 - 104°F)
6 – Specifications/rated values

Dimensional drawings

Operation time
CA-XLR2d-C
About 5 hours
About 4 hours
About 7 hours
About 5 hours
Operation time
CA-XLR2d-F
About 10 hours
About 8 hours
About 14.5 hours
About 10 hours
CA-XLR2d-AN
o Illustrations in this reference manual might differ in part from
the actual product.
o Specifications and external appearance might be changed
without notification to improve the product.
54.0mm
88.2mm 119.1mm
54.0mm
88.2mm 119.1mm
54.0mm
88.2mm 119.1mm
TASCAM CA-XLR2d
19