Connecting With Cameras - Tascam CA-XLR2d Reference Manual

3 – Preparation

Connecting with cameras

After preparing this unit, connect it to a camera.
ATTENTION
i Always confirm that the power is off on both this unit and the
camera before connecting them.
i Do not hold this unit when lifting a connected device. Doing
so could put excessive burden on the connection parts and
damage this unit and the connected device.
i Disconnect this unit from the connected device and store it
when not in use. Not doing so could put excessive burden
on the connection parts and damage this unit and the
connected device.
Connecting to a camera
(CA-XLR2d-C/CA-XLR2d-F)
1.
Disengage the lock lever (k) or the tightening dial (l), and
remove the accessory shoe attachment adapter cover.
10
TASCAM CA-XLR2d
2.
With the unit oriented correctly, mount the connector part
to the camera accessory shoe, sliding it all the way in.
3.
Using the lock lever (k) or the tightening dial (l), attach
this unit to the connected device securely.
Lock button
NOTE
To remove a CA-XLR2d-C, release the lock lever while
pressing the lock button.