Making Other Connections - Tascam CA-XLR2d Reference Manual

3 – Preparation

Making other connections

This section explains how to connect and use various devices.
Connecting two mics
When connecting a mic to the INPUT 2 jack (p) set the SELECT
switch (2) to "IN 1+2" and set the INPUT 2 switch (7) according
to the type of mic connected.
When using mics that require phantom power, set the INPUT 1
(4) and INPUT 2 (7) switches to "+48V".
Connecting mics to the mini jack
Wireless mic receiver
When connecting a stereo lapel mic, for example, connect it to
the INPUT 3 jack (a), and set the SELECT switch (2) to "IN 3".
NOTE
When the SELECT switch (2) is set to "IN 3", the INPUT 1
switch (4) has no effect.
14
TASCAM CA-XLR2d
Connecting line level equipment
When connecting a mixer or other line level equipment, use XLR
or TRS cables to connect it to this unit, and set the INPUT 1 (4)
and INPUT 2 (7) switches to "LINE".
Connecting headphones
To monitor analog audio signals, set the OUTPUT switch (r) to
, and connect headphones or an earphone, for example, to the
OUTPUT jack (t). Then use the
adjust the volume.
TIP
By connecting headphones to this unit, the sound can be
monitored with relatively less latency than the sound output
from the camera headphone jack.
VOLUME +/− buttons (y) to