Table of Contents
Advertisement
Using Lag Correction (Lag Correction)
The Lag Correction function lets you correct for the lag time from the point you decide
to shoot until the point it takes for the shutter to actually release. This feature actually
does not speed up shutter release, but instead it pre-records images when you half-
press the shutter button and saves what occurred slightly before you press the
shutter button.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the third control panel
option from the bottom (Lag Correction).
3.
Use [4] and [6] to select the lag correction time you want and then
press [SET].
You can select a correction time of "
"Ó Off" to disable lag correction.
4.
Half-press the shutter button.
This starts pre-recording in accordance with the correction time you selected in
step 3.
5.
When you want to record, press the shutter button the rest of the way
down.
This records the image currently in the buffer.
0.1", "
0.2", or "
0.3" seconds. Select
–
–
–
40
Snapshot Tutorial
Advertisement
Table of Contents
