Table of Contents
Advertisement
Using Flash (Flash)
1.
In the REC mode, press [2]
(
) once.
2.
Use [4] and [6] to select the
flash setting you want and
then press [SET].
Auto Flash
>
Flash Off
?
Flash On
<
Red Eye
¥
Reduction
3.
Press the shutter button to shoot.
• For information about Flash Range, see page 180.
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes red while the flash is charging to indicate that image
recording is disabled.
• You will not be able to take another flash snapshot until the lamp
stops flashing red, which indicates that charging is complete.
< indicates the flash will fire.
[2] (
)
42
Flash
Snapshot Tutorial
Advertisement
Table of Contents
