Casio Exilim EX-FS10 User Manual page 127

4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
USB port
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the
camera if you connect via a USB hub. Always connect directly to the
computer's USB port.
5.
Turn on the camera.
Large connector
Making sure that the 6 mark on the camera is aligned with
the 4 mark of the USB cable connector, connect the cable
to the camera.
USB cable
USB/AV port
Small connector
127
Using the Camera with a Computer