Low Battery Indicator; Display Fahrenheit Or Celsius - Travis Industries GS2 Installation Manual

Low Battery Indicator

Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 1 below), install
four new AAA alkaline batteries into the transmitter (see "Transmitter Battery Installation" on page 7).
Receiver Batteries
The receiver will "beep" periodically when the receiver batteries go low. Install four new AA alkaline batteries into
the receiver when this occurs (see "Receiver Battery Installation" on page 7). In applications where the appliance
is required to provide heat, we recommend replacing the batteries before each heating season.

Display Fahrenheit or Celsius

 With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons simultaneously
to toggle between Fahrenheit (F) and Celsius (C).
Page 11 of 13
GS2 Basic Wall Mount Remote Operation
Low Battery Indicator
MAX
17601967 - 2/12/19
SKU# 99300695
F
ON
AUX
F
F
C
Travis Industries, Inc.
Figure 1