Display Fahrenheit Or Celsius; Power Outages; Low Battery Indicator; Child-Proof Feature - Travis Industries GreenSmart 2 Setup Instructions

Hide thumbs Also See for GreenSmart 2:
Table of Contents

Advertisement

Display Fahrenheit or Celsius

 With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C).

Power Outages

The remote will work if household current (AC power) is disconnected. The batteries inside the battery
box will continue to power the heater but the accent light and blower will not operate.

Low Battery Indicator

Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see below), install three
new AAA alkaline batteries into the transmitter (see "Transmitter Battery Installation" on page 7).
IFC Batteries
The IFC (Integrated Fireplace Control) will "beep" repeatedly when the batteries go low. Install four new
AA alkaline batteries into the battery box when this occurs (see "Battery Installation" on page 7). In
applications where the appliance is required to provide heat, we recommend replacing the batteries
before each heating season.

Child-Proof Feature

The child proof feature disables the control buttons, preventing un-wanted use of the remote.
 Press both the MODE and UP buttons simultaneously to turn this feature on and off (see below).
HINT: This feature is especially useful while using the thermostat setting.
Page 8 of 10
TM
GreenSmart
(SKU 99300688, 99300690, 99300692, 99300693)
Low Battery Indicator
OFF
MAX
17601740.docx — 11/3/16
2 Remote Setup Instructions
F
F
C
F
Child Proof Indicator
OFF
MAX
F
© Travis Industries, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents