Travis Industries GS2 Installation Manual page 10

Manual On-Off / Standard Thermostat
Use the thermostat button to cycle through the two thermostat settings (see below).
Look here for the
thermostat setting.
 MANUAL ON/OFF – The burner will turn on and off using the remote (see below). Press the On/Off
button to control the burner. When off, the display will only show the current temperature.
 THERMOSTAT - While in standard thermostat setting, the transmitter will turn the burner on and off to
achieve the target temperature (see below). To adjust the target temperature, press the up and down
buttons until a suitable temperature is achieved.
When in standard thermostat
setting, the word "ON" will
NOTE: If the transmitter batteries go dead while in thermostat setting, the appliance will shut off after
approximately 24 hours.
Page 10 of 13
GS2 Basic Wall Mount Remote Operation
F
ON
When in manual setting, the
word "OFF" will appear here.
ON
appear here.
17601967 - 2/12/19
SKU# 99300695
Press the thermostat button to cycle
through the thermostat settings.
OFF
F
This is the target
temperature on the
read-out. Use the up or
down buttons to adjust
the target temperature.
OFF
ON
SMART
F
Travis Industries, Inc.