Low Battery Indicator; Child Proof Feature; Power Outages - Travis Industries GreenSmart SKU 99300699 (NG) Instalation Instructions

Low Battery Indicator

Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 42 below),
install four new AAA alkaline batteries into the transmitter (see "Transmitter Battery Installation" on page
10).
Receiver Batteries
The receiver will "beep" periodically when the receiver batteries go low. Install four new AA alkaline
batteries into the receiver when this occurs (see "Receiver Battery Installation" on page 10). In
applications where the appliance is required to provide heat, we recommend replacing the batteries
before each heating season.

Child Proof Feature

The child proof feature disables the control buttons, preventing un-wanted use of the remote.
Press both the MODE and UP buttons simultaneously to turn this feature on and off (see Figure
43 below).
HINT: This feature is especially useful while using the thermostat setting.

Power Outages

The remote will work if household current (AC power) is disconnected. The batteries inside the receiver
will continue to power the heater but the accent light and blower will not operate.
Page 15 of 15
GreenSmart™ Remote – Export Version
SKU 99300699 (NG)
Low Battery Indicator
ON
MAX
9/25/09 - 17601590
SKU 99300698 (LP)
F
Child Proof Indicator
F
ON
MAX
© Travis Industries, Inc.
Figure 42
Figure 43