Safety Information - Weller WE 1 Translation Of The Original Instructions

GB
ENGLISH
Read these instructions and the safety
guidelines carefully before starting up the unit
and starting work.
life and limb.
Keep these instructions in a place that is accessible to all
users. Please adhere to the operating instructions of the
connected devices.

Safety information

been given supervision or instruction
concerning use of the appliance in a
the appliance.
Cleaning and user maintenance shall
vision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
14
WARNING Electrical shock
Connecting the control unit incorrectly poses a risk of
injury due to electric shock and can damage the device.
•
putting the control unit into operation and observe the
•
If the device is faulty, active electrical conductors may be
bare or the PE conductor may not be functional.
-
•
specialist.
•
cord available through the customer service organisation.
Protect yourself against electric shocks. The handles on
soldering tools with an antistatic design are conductive.
Avoid touching earthed objects such as pipes, heaters,
•
cookers and refrigerators.
Do not use the soldering tool in a damp or wet environment.
•
•
Caution! To provide continued protection against risk of
•
WARNING Risk of burns
-
Risk of burns from the soldering tool while the control
unit is operating. Tools may still be hot long after they
have been switched off.
The soldering tip becomes very hot during soldering
work. There is a risk of burns from touching the tips.
After the soldering process, the soldering tool and the
workpiece holder are still hot.
Risk of burning through liquid solder. Protect yourself
against solder splashes.