Advertisement
Universal Holding Cabinet
UHC6PT-22MCD
Safety Information
Indicates information important to the proper operation of
the unit. Failure to observe may result in damage to the
equipment and/or severe bodily injury or death.
Indicates information important to the operation of the unit.
Failure to observe may result in damage to the equipment.
Unpack and inspect. Remove the unit from the
1
carton and inspect for signs of damage. If there is
damage to the unit:
• Notify the carrier within 24 hours of delivery.
• Save carton and packaging materials for inspection
purposes.
• Contact your local dealer, or if purchased directly,
the Prince Castle Sales Department at
1-800-722-7853 or 630-462-8800 to arrange for a
replacement unit.
Place Universal Holding Cabinet (UHC) on flat
2
surface. Remove blue and/or white protective
covering.
NOTE: When installing this unit, the ambient
temperature at the mounting site should not exceed
100°F (38°C).
Printed in USA 4/10 © 2010
WARNING
CAUTION
Prince Castle reserves the right to change specifications
and product design without notice. Such revisions do not
entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased
equipment.
Electrical Specifications
208-240V 50/60 Hz 2250-3450W
Installation
Plug unit in. Plug
3
unit into a grounded
receptacle with a
matching plug
configuration.
All electrical connections must be in accordance
with local electrical codes and any other
applicable codes.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
To prevent an electric shock hazard this device
must be bonded to equipment in close proximity
with an equipotential bonding conductor. This
device is equipped with a grounding lug for this
purpose and is marked with the following symbol.
2
P
C
LLC
RINCE
ASTLE
W O R L D W I D E
Important
WARNING
547-500revA_EN
Advertisement
