Wellness TechnoGym Element Cables Crossed User Manual page 20

Contents
Identification of the manufacturer
and the equipment
Description of the equipment
Technical data
Safety labels and devices
Packing
Place of installation
Unpacking
Assembling the equipment
Securing the equipment
Lifting and handling
the equipment
Routine maintenance
Replacing the cable
Replacing the spring hook
Technical Service
Storage
Disposing of the equipment
Installing accessories
Using the equipment
Securing the equipment
- mark the position of two 14 dia. holes
on the wall;
- fully tighten brackets (C) to the
frame;
- drill the wall and insert the rawl
plugs (F) in the wall holes;
- bring the equipment up to the wall
and ensure the holes in the wall are
aligned with the holes on the bracket;
- screw in screws (G) and tighten to
the wall.
D
ANGER
ALWAYS use rawl plugs
supplied directly by Technogym.
If these cannot be obtained, use
a rawl plug that strictly meets the
following minimum requirement:
minimum guaranteed workload
of 90 kg.
Cables Crossed
G
C
F
04269113
20