With Browser; Deactivating Protection; Deactivating Protection Of Twinsoft Document - semaphore TBOX LT2-530 Series User Manual

17.4.2. With Browser

If you have developed HTML pages based on webforms 2.0, you can access
LT2
acts as a Web Server. Any browser on multiple platforms can access webform 2.0 pages in
The utility software TConnect is the perfect candidate to establish this kind of connection (see
http://helpdesk.servelec-technologies.com). In case of dial-up connection, you will have to indicate the
NAME and PASSWORD to login.
TB
Even if
Depending on Windows and IE versions, they may not allow a connection without login.

17.5. Deactivating protection

There are two methods of deactivating
Global reset (see chapter 5.6.)
The first method is by performing a global reset, which must be carried out on site. When the program
has been stopped, the local port is no longer protected.
If the 'modem' has been declared protected, it will still be protected even after a global
reset. To deactivate the protection, an unprotected TWinSoft document must be sent to
TB LT2
OX
Sending an unprotected TWinSoft document
The second method involves modifying the TWinSoft document and deactivating the access Security
option. The document is sent to

17.6. Deactivating protection of TWinSoft document

You have to open the document and de-activate 'Access security' and 'Document password' in tab
'Security' (RTU properties).
If you have forgotten your access security login, but still remember the Global Code, you can generate a
new login (see chapter 17.3. above).
If you have forgotten your Global Code and or the document password, you have to contact your local
distributor and send him the application, the <application>.tws file.
Version : 1.09
LT2
is not protected, type a NAME and PASSWORD.
OX
TB LT2
OX
(see below).
TB LT2
after having logged in as 'Engineer'.
OX
access protection:
TB LT2
using a broser.
OX
TB
OX
TB
OX
LT2
.
150