Speaker Setup - Onkyo TX-DS484 Instruction Manual

Speaker setup

LEVEL π/† buttons
Use these buttons to adjust the
level of each speaker.
1
2
PARAMETER CONTROLLER
PARAMETER SELECTOR
3
PARAMETER CONTROLLER
PARAMETER SELECTOR
14
PARAMETER SELECTOR/ PARAMETER CONTROLLER buttons
Use these buttons to set the speaker parameters, such as the type and distance.
PARAMETER SELECTOR
or
or
CH SEL button
Use this button to select a speaker.
TEST TONE button
Use this button to adjust the
level of each speaker.
Speaker setup
Before operating your stereo system, you need to set the type and
position of the connected speakers.
1. Press the PARAMETER SELECTOR® button once to dis-
play the subwoofer parameter.
2. Press the PARAMETER CONTROLLER √/® buttons to
select "YES" if a subwoofer is connected, or select "NO" if a
subwoofer is not connected.
3. Press the PARAMETER SELECTOR® button to display
the front speaker size parameter, and press the PARAME-
TER CONTROLLER √/® buttons to select "LARGE" or
"SMALL" according to the speaker size.
LARGE: Select this for large, wideband speakers.
SMALL: Select this for small speakers with limited bass signal
handling.
If you have selected "NO" for the subwoofer in step 2, you can
select only "LARGE" for the front speakers.