Recording A Source - Onkyo TX-DS484 Instruction Manual

Recording a source

You can record analog Audio, but not digital audio. Make sure that you have made a correct analog connection.
You cannot record the source connected to MULTI CH INPUT jack.
If you select another device as the input source during recording, the input signal from that device will be recorded.
You cannot record audio source along with the surround effects.
1
STANDBY/ON
STANDBY
POWER
PRESET
ON OFF
A SPEAKERS B SURROUND MODE
MUL TI CH INPUT DVD VIDEO 1 VIDEO
PHONES
1·3
Tape deck
(TAPE)
2
DVD VIDEO 1
FM AM
2
MASTER VOLUME
PARAMETER SELECTOR
PARAMETER CONTROLLER
TUNING
LATE NIGHT DIMMER MEMORY FM MODE
CLEAR
BASS TREBLE
C D
2 TAPE FM AM PHONO
AV RECEIVER TX-DS484
3
Turntable
CD player
VCR, VDP
DVD
VIDEO 2
C D
PHONO
Recording an audio source
Make all connections between the tape deck and the receiver as
shown in the "Audio equipment connections" diagram (page 6).
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the source you want to
record.
If you select DVD, VIDEO 1 or VIDEO 2, only the audio will
be recorded.
If you select FM or AM, set the tuner to the station you want to
record.
3. Set the tape deck in recording mode. Start playing the
source.
Set the proper recording level using the controls on the tape
deck.
Please read the corresponding instruction manuals for more
information on how to operate the corresponding equipment.
25