Audio Equipment Connections - Onkyo TX-DS484 Instruction Manual

Audio equipment connections

On each pair of input jacks, a red connector (marked R) corresponds to the right
channel, and a white connector (marked L) to the left channel.
Please refer to the instruction manual of each component when making any con-
nections.
This receiver is designed for use with turntables using moving magnet cartridges.
Insert the plugs and connectors securely. Remember that improper connection
can result in noise, poor performance, or damage to the equipment.
L
R
PHONO
Ground
OUTPUT
Turntable
A DVD or other component equipped with a digital output can be connected to this receiver. The digital connection must be
used in conjunction with an analog connection, because if the analog cable is disconnected, the audio output from TAPE OUT
and VIDEO 2 will not work.
6
Tape Deck
INPUT OUTPUT
(REC) (PLAY)
COAXIAL COAXIAL
SUB
ANTENNA
2 1
WOOFER
PRE OUT
R L
( REC )
AM
OUT R L
TAPE
MONI- FRONT
TOR
( PLAY )
OUT
I N
SURROUND
DVD I N
FM
75
VIDEO 1
I N
GND SUB
CENTER
WOOFER
OUT
VIDEO 2
I N
MULT I CH I NPUT
R L V
CD
OUTPUT
(ANALOG)
See page 7
OPTICAL
DIGITAL INPUT
R L
REMOTE CONTROL
A
TX-DS484
B
R L
FRONT SPEAKERS
OUTPUT (COAXIAL)
OUTPUT (DIGITAL)
CD Player
Audio connection cable
L (Left)
R (Right)
Improper connection
Insert completely
R L
CENTER
R L AC OUTLETS
CENTER SURROUND AC 230V 50Hz
SPEAKER SPEAKERS SWITCHED
TOTAL 100W MAX.
Do not plug in the power
cord until all connections
have been made.
: signal flow
L
R
To wall
outlet