Service Data - Zanussi ZOB65902XU User Manual

Hide thumbs Also See for ZOB65902XU:
Table of Contents

Advertisement

Available languages

Available languages

Problem
Steam and condensation settle
on the food and in the cavity of
the oven.
There is no good cooking per-
formance using the function:
True Fan Cooking PLUS.
There is no good cooking per-
formance using the function:
True Fan Cooking PLUS.
You want to activate the True
Fan Cooking PLUS function,
but the Plus Steam indicator
does not switch on.
You want to activate the True
Fan Cooking PLUS function,
but the Plus Steam indicator
does not switch on.
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
The display shows "12.00".

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Possible cause
You left the dish in the oven for
too long.
You did not turn on correctly
the function: True Fan Cooking
PLUS with the Plus Steam.
You did not fill the cavity em-
bossment with water.
You did not select the heating
function that support Plus
Steam.
The Plus Steam does not work.
The temperature is too low.
There is too much water in the
cavity embossment.
There was a power cut.
We recommend that you write the data here:
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Refer to "Setting the function:
True Fan Cooking PLUS".
Refer to "Setting the function:
True Fan Cooking PLUS".
Refer to "Setting the function:
True Fan Cooking PLUS".
Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and acti-
vate it again.
Refer to "Setting the function:
True Fan Cooking PLUS".
Set the temperature at least to
110 °C.
Refer to "Hints and tips" chap-
ter.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to the spe-
cific procedure.
Reset the clock.
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
Remedy
29

Advertisement

Table of Contents
loading

Table of Contents