Huawei FusionModule500 Smart User Manual page 162

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Maintenance
Area
Intelligent lithium
battery
monitoring system
Water sensor and
water detection
cable
Issue 02 (2021-06-30)
Maintenance Operation
Item
Battery -
management
alarm
Cleanliness -
Battery -
connection
Measurement of -
the ambient
temperature of
the intelligent
battery
monitoring system
Functions of the Place the water
water sensor and detection cable
water detection into the water
cable and check
whether a water
leakage alarm is
generated by the
water sensor.
Copyright © Huawei Technologies Co., Ltd.
Expected Result Troubleshootin
g
No battery Identify the
management cause of an
alarm is alarm based on
generated. the alarm
information.
Wipe the battery Remove dust.
surface using a
piece of white
paper and the
paper does not
turn black.
Battery terminals Locate poor
and cables are in contact points
good contact. between battery
terminals and
cables.
The ambient Locate the
temperature of cause of an
the intelligent abnormal
battery temperature.
monitoring
system is lower
than 45°C.
A water leakage If a water
alarm is leakage alarm is
generated. not generated,
replace the
water detection
cable.
6 O&M
153