Huawei FusionModule500 Smart User Manual page 155

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Related
Operatio
ns
Delete
modules
Add tools
Issue 02 (2021-06-30)
Procedure
You can delete one module or multiple modules in batches on the
current page.
NOTE
If a module contains subdevices, you cannot delete it. You can delete the
module only after you delete subdevices in the module.
● Delete one module.
1. Right-click Modular and click Delete under
2. In the displayed Confirm dialog box, click Yes.
● Delete multiple modules in batches.
1. Click on the toolbar. The Batch Delete dialog box is
displayed.
Figure 5-20 Deleting multiple modules in batches
2. In the filter box, set filter criteria to filter required modules.
3. Select the smart module to be deleted and click Delete.
4. In the displayed Confirm dialog box, click Yes.
1. Select the module for which you want to add a pillar.
2. In the lower-left corner of the current page, click Tool.
3. Select the Pillar component to be added and drag it to the
planning configuration area.
NOTE
After the component is added, you can set attributes for the component
in the Component Info list in the right pane. The system automatically
displays values for Parent Name and Control Type, and you do not need
to manually set them, you only need to set Name.
4. In the upper area of the current page, click
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
.
.
146