Inspection Before Use; Inspection For Appropriate Connection; Inspection For Material Surface - Hitachi EUP-L65 Instruction Manual

2. Inspection before Use

Prior to use, the probe must be carefully inspected that it is
appropriate for use. If you find any damage, do not use the probe
and immediately contact a service support.
2.1 Inspection of appropriate connection
2.1.1 Confirm that the system is correctly operating. Refer to the
instruction manual for the ultrasound diagnostic scanner.
2.1.2 Do not attach or connect unauthorized devices nor instruments
on the probe, such as unauthorized biopsy attachments.
If a biopsy operation is required, refer to its instruction
manual for inspection, preparation, operation and cleaning
through sterilization.
2.2 Inspection of material Surface
2.2.1 Visually inspect that the surface of the probe and head,
housing, the cable and the connector for any crack, scratch
or denaturalization.
2.2.2 Visually inspect the magnetic sensor attachment and the
spacer for EZU-RV2S for any crack, deformation or
denaturalization.
2.2.3 Visually inspect the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do
not use the elasto coupler.
- 4 - Q1E-EP0739