Operation Procedure - Hitachi EUP-L65 Instruction Manual

3. Operation Procedure

1) Confirm that the probe is cleaned and disinfected.
2) Connect the probe to the ultrasound diagnostic scanner, operate
the scanner, and adjust the image, all according to the
instructions given in the operation manual for the ultrasound
diagnostic scanner with which the probe is used as connected.
3) Confirm the direction of the probe. The relationship between the
direction of the probe and image is shown in Fig. 2.
The Right-left orientation mark on the image indicates the
direction of the index mark of the probe.
Fig. 2 Relationship between the directions of the probe
and the Right-left orientation mark
4) Under sterile condition, protecting the probe by using covers
is recommended. Some Latex material may create allergic reaction.
Please use allergy free material covers.
5) After using the probe, perform the reprocessing procedure in
accordance with the procedure stated in "5.Reprocessing procedure"
every time immediately after completing the ultrasound
examination.
6) Confirm that the magnetic sensor attachment, the spacer for
EZU-RV2S and the elasto coupler are cleaned, disinfected and
sterilized.
Index mark
Right-left
orientation mark
- 5 - Q1E-EP0739