Inspection Before Use; Inspection For Appropriate Connection; Inspection For Material Surface - Hitachi EUP-C516 Instruction Manual

2.

Inspection before Use

Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1

Inspection for Appropriate Connection

2.1.1 Confirm that the system is correctly operating. Refer to the
instruction manual for the ultrasound diagnostic scanner.
2.1.2 Do not attach or connect unauthorized devices or instruments
on the probe, such as unauthorized biopsy attachments.
2.2

Inspection for Material Surface

2.2.1 Visually inspect the surface of the probe and head, housing,
the cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe
and contact a service support immediately.
2.2.2 Visually inspect the magnetic sensor attachment and the
Spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them
and contact a service support immediately.
-4- Q1E-EP0386