Inspection Before Use; Inspection For Appropriate Connection; Inspection For Material Surface - Hitachi EUP-L73S Instruction Manual

2.

Inspection before Use

Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1 Inspection of appropriate connection
2.1.1 Confirm that the system is correctly operating.
Refer to the instruction manual for the ultrasound
diagnostic scanner.
2.1.2 Do not attach or connect unauthorized devices nor
instruments on the probe, such as unauthorized biopsy
attachments.
2.2 Inspection of material surface
2.2.1 Visually inspect that the surface of the probe and head,
housing, the cable and the connector for any crack, scratch
or denaturalization. If you find any damage, do not use
the probe and contact a service support immediately.
2.2.2 Visually inspect the magnetic sensor attachment and the
spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them
and contact a service support immediately.
2.2.3 Visually inspect the elasto coupler for any crack,
deformation or denaturalization. If you find any damage,
do not use the elasto coupler. If you find any damage, do
not use the elasto coupler and contact a service support
immediately.
- 4 - Q1E-EP1019