Table of Contents
Advertisement
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is
•
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range may damage the battery and increase the risk
SERVICE
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
BACKPACK CONCRETE VIBRATOR
Do not use accessories which are not specifically
•
designed and specified by the tool manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
Always install flex shaft and head according to
•
the
manufacturer's
accessories matching the tool coupler.
•
Chemical Burn Hazard. Keep coin cell battery
away from children.
•
Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
MILWAUKEE
Tool or a trained professional for
®
additional information or training.
Maintain labels and nameplates. These carry
•
important
information.
missing,contact a MILWAUKEE
for a replacement.
Some dust created by power sanding,
WARNING
sawing, grinding,
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
Charging
instructions.
Only
If
unreadable
service facility
®
drilling, and other
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
WARNING
Volts
Direct Current
Vibrations per Minute (VPM)
Read operator's manual
Wear personal protective equipment
(PPE) according to the job site
PPE
requirements.
Wear eye protection
Pairing
Remote mode
OFF position
Regulatory Compliance Mark (RCM).
This
regulatory requirements.
Do not dispose of electric tools
use
together
material. Electric tools and electronic
equipment that have reached the end
of
separately
environmentally compatible recycling
facility.
SPECIFICATIONS
Cat. No. ................................................ MXF CVBP
Battery Type ........................................ MX FUEL™
Charger Type....................................... MX FUEL™
Recommended Ambient
or
Charging Temperature ...................... 5°C to 40°C
MX FUEL
Li-Ion Battery Packs ............. 72V DC
TM
Rated VPM ...................................................11,200
MILWAUKEE
®
2.1 m (7') Flex Shaft .........Cat. No. MXF CVS-21M
4.2 m (14') Flex Shaft .......Cat. No. MXF CVS-42M
38 mm (1-1/2") Head......Cat. No. MXF CVH-38MM
50 mm (2") Head ............Cat. No. MXF CVH-50MM
Remote Cat. No. .................................... 22800237
Communication Range ............................ Up to 9 m
Battery Type..................................................2xAAA
3
To reduce the risk of fire, personal
injury, and product damage due to
Do not charge non-rechargeable
batteries.
SYMBOLOGY
product
meets
with
household
their
life
must
and
returned
Flex Shafts and Heads
Cold Start LED
ON position
applicable
waste
be
collected
to
an
Advertisement
Table of Contents
