Essential Platinum Brine Tank; Essential Brine Valve Settings - Kinetico Essential Series Technical Manual

Essential Platinum Brine Tank

System Components
Tank Construction
Connections
Inlet / Outlet Connections
Drain Connection
System Part Number
Complete Assembly (18" x 35")
Grid Plate Asembly (5" x 18")
Brine Well (4" x 30.5")
Brine Valve Assembly (18" x 35"
Dimensions and Weight
Height
Diameter
Shipping Weight
Salt Capacity
Operating Weight (Approximate)

Essential Brine Valve Settings

Essential Gold
These units come with a pre-adjusted brine valve. No additional set-up is required.
The float is preset to a 0.8 lb. salt setting. This can be confirmed by measuring the
distance of the float cup from the top of the fixed adjuster tube. This distance is 0.50
inches (drawing not to scale).
Essential Platinum
The standard settings for the float cup are located on the adjuster rod
5
The Essential Platinum should be set to 7 3/4". In many cases the float
cup settings are a measured distance (in inches) from the bottom of
the valve body to the top of the float cup. Align the very top of the
float cup with the marked line or measurement on the adjuster rod.
4
After the cup is set, check the alignment of the brine valve guide to
ensure that it is still directly aligned over the brine valve body. Set to
one (1).
3
2
Essential Platinum Settings
1
Float Cup
Float Cup Height
Adjuster Tube
Salt Setting
Essential Series Gold and Platinum
HDPE
0.375" Tubing
0.625" Tubing
15062
1539
1610A
7805
35" 889 mm
18" 458 mm
21 lb 9.5 kg
250 lb 114 kg
335 lb 152 kg
1
7 3/4"
1.25
1.25
8
.50