Valve Assembly - Kinetico Essential Series Technical Manual

Valve Assembly

1. Place level 6 seal on level 6
Place in check stem
4. Insert outlet piston into level 4
Outlet Position
7. Place level 5 seal on level 5
Drain valve
10. Insert regen flow control into level
Concave side is installed down. Then install
filter disc.
Essential Series Gold and Platinum
2. Connect control valve to level 4
Push
5. Add seats to inlet and outlet valves
Push
Screw
8. Place level 4 subassembly on level 5
11. Place level 3 on level 4/5
3. Insert unitary piston into level 4
6. Insert BWFC into level 4
9. Place level 4 seal on level
12. Add by-pass seat
18
Push
Screw
Hold