Table of Contents
Advertisement
2 General information
2.1 Information
- The descriptions and instructions apply to the standard ver-
sions. For special versions not described in this document
the basic information contained herein applies in combina-
tion with any additional special documentation.
- Correct installation, operation, maintenance and repair work
ensure faultless operation of the product.
- Should there be any doubts or misunderstandings, the Ger-
man version is the authoritative document.
- Contact us at the address on the last page for staff training
information.
- For ProfiNet, Profibus DP and DeviceNet fieldbus variants,
separate documents are available for the fieldbus-specific
and relevant procedures.
General commissioning and basic operation have already
been described in this document.
2.2 Symbols used
The following symbols are used in this document:
Symbol
Tasks to be performed
Response(s) to tasks
–
Lists
2.3 Definition of terms
Working medium
The medium that flows through the GEMÜ product.
Control function
The possible actuation functions of the GEMÜ product.
Control medium
The medium whose increasing or decreasing pressure causes
the GEMÜ product to be actuated and operated.
Speed-
AP
function
Speed Assembly and Programming, a particularly user-
friendly commissioning function for fast mounting, automated
setting and initialization of GEMÜ products. Dependent on
type, activation uses an external impulse signal or existing
precautions on the device (magnetic or housing switch).
Changeover to normal operating mode takes place automatic-
ally after successful completion.
www.gemu-group.com
Meaning
2.4 Warning notes
Wherever possible, warning notes are organised according to
the following scheme:
Type and source of the danger
Possible
symbol for the
Possible consequences of non-observance.
specific
Measures for avoiding danger.
danger
Warning notes are always marked with a signal word and
sometimes also with a symbol for the specific danger.
The following signal words and danger levels are used:
Imminent danger!
▶ Non-observance can cause death or
Potentially dangerous situation!
▶ Non-observance can cause death or
Potentially dangerous situation!
▶ Non-observance can cause moderate
Potentially dangerous situation!
▶ Non-observance can cause damage to
The following symbols for the specific dangers can be used
within a warning note:
Symbol
Exhaust air and cycle duties generate noise
5 / 33
2 General information
SIGNAL WORD
DANGER
severe injury.
WARNING
severe injury.
CAUTION
to light injury.
NOTICE
property.
Meaning
GEMÜ 1441 cPos-X
Advertisement
Table of Contents
