Advertisement
Quick Links
Advertisement
Related Manuals for Kogan AC1200
Summary of Contents for Kogan AC1200
- Page 1 WI-FI AC1200 WHOLE- HOME MESH (3 PACK, WI-FI 5) KAWM6WF53PA...
-
Page 3: Components List
COMPONENTS LIST • Mesh3 Node (x3) • Power Adapter (x3) • Ethernet Cable • User Guide OVERVIEW WAN/LAN port LAN port DC power jack Reset button Wall mounting holes Wall mounting hole Used to fix the device to the wall. Recommended specifications are: •... -
Page 4: Installation
INSTALLATION Install the KoganMesh App Download the KoganMesh App onto your mobile device by searching for KoganMesh in App Store or Google Play or by scanning the QR code. Then install the KoganMesh App. KoganMesh App Available for iOS and Android... - Page 5 Connect the Primary node: The first node you set up functions as the primary node, while the rest are referred to as the secondary nodes. Reset Internet Modem Ethernet jack Power off your modem and remove its battery (if any). Use the included Ethernet cable to connect a LAN port of your modem or the Ethernet jack to the (WAN/LAN) port of one of the nodes.
- Page 6 Connect the primary node to the internet Go to the Wi-Fi network list on your mobile device, select the SSID of the primary node and enter its password. The SSID and password are specified on the bottom label of any node. Run the KoganMesh App and follow the onscreen instructions to connect the primary node to the internet.
- Page 7 Connect the secondary nodes to the internet 1. Place each node: • In a high & open area • Ensure that there are less than two walls between any two nodes. • Keep your nodes away from electronics with strong interference, such as microwave ovens, induction cookers and refrigerators.
- Page 8 To access the internet: • Wired devices: Connect wired devices to the LAN ports of your nodes. • Wireless devices: Connect wireless devices to the Wi-Fi network using the SSID and Wi- Fi password you set. • To manage the network anytime anywhere, tap “ ”...
- Page 9 SPECIFCATIONS Input 100 - 240 V, AC, 50/60 Hz, 0.4 A Output 12 V, DC 1 A Operating Temperature 0-40°C Operating Humidity (10-90) % RH, non-condensing Q1: How can I remove a node from my Wi-Fi network? A1: Tap the node on the KoganMesh App, tap ... in the upper-right corner and choose Delete.
- Page 10 Q4. My 2.4 GHz Wi-Fi-enabled devices, such as a home security camera, cannot connect to my nova Wi-Fi network. What should I do? A4: Please try the following solution: Step 1: Connect your smart phone used during setup to your Wi-Fi network. Step 2: Run the KoganMesh App, tap Settings, Smart Assistant and Enable.
- Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...