Advertisement
Connect the Primary node:
The first node you set up functions as the primary node, while the rest are referred to as the
secondary nodes.
Internet
Modem
1.
Power off your modem and remove its battery (if any).
2.
Use the included Ethernet cable to connect a LAN port of your modem or the
Ethernet jack to the (WAN/LAN) port of one of the nodes. This node is your primary
node.
3.
Reinstall its battery and power on your modem.
4.
Use the included power adapter to connect the primary node to a power source,
the LED indicator lights solid green. Wait about for 40 seconds. The system
completes start-up when the LED indicator blinks green.
Reset
Ethernet jack
Advertisement
