Advertisement
SPECIFCATIONS
Input
Output
Operating Temperature
Operating Humidity
FAQ
Q1: How can I remove a node from my Wi-Fi network?
A1: Tap the node on the KoganMesh App, tap ... in the upper-right corner and choose
Delete.
Note:
Removing operation restores the node to factory settings.
Q2: Can I add another new set of nodes to expand my network coverage?
A2: Yes. Run the KoganMesh App, tap Settings in the lower-right corner, tap Add nova and
follow the on-screen instructions.
Q3: How to restore my network to factory settings?
A3: With your nodes powered on, hold the Reset button of your primary node down using a
sharp item (such as a pin) for about 6 seconds and release it when the LED indicator blinks
fast. Your network is reset successfully when the LED indicator lights solid green then blinks
slow again. All nodes will be restored to factory settings.
100 - 240 V, AC, 50/60 Hz, 0.4 A
12 V, DC 1 A
0-40°C
(10-90) % RH, non-condensing
Advertisement
