Related Manuals for Kogan Ergolux ELSTD1MTMBA
Summary of Contents for Kogan Ergolux ELSTD1MTMBA
- Page 1 STANDING DESK ELECTRIC SINGLE MOTOR - MEMORY (BLACK/WHITE) ELSTD1MTMBA/ELSTD1MTMWA...
-
Page 2: Safety And Warnings
SAFETY & WARNINGS Service Environment: 0–40°C Unplug the power plug before cleaning, wipe the dust on surface with a damp cloth when cleaning and be careful not to let water drops into the internal parts or loosen the connector. ... - Page 3 OVERVIEW Note: The drawings below are only for reference and maybe slightly different from the product you receive. If you are missing any parts or have any issues installing, please contact Kogan.com. LED Display...
- Page 4 Part List: Part Quantity 2 x Pedestal 1 x Column 1 x Column 1 x Supporting beam 1 x Transmission rod 2 x Supporting plate 1 x Control box 2 x Baffle...
- Page 5 1 x Control panel 1 x Power cable 4 x Cable tie Control panel: "▲" Adjust the desk upwards "▼" Adjust the desk downwards "1" Position 1, first height position saved by the user "2" Position 2, second height position saved by the user "3"...
-
Page 6: Installation
INSTALLATION Step 1 Install pedestal (1). Connect (1), (2) and (3) together: use 5x5 wrench (C) to tighten the screws (A). Step 2 Install supporting beam (4). - Page 7 Lay column (2) down as in picture 1 and install (4): use wrench (C) to tighten screws (B). Install column (3) as in picture 2. Adjust the support to suit table top dimensions. Step 3 Install transmission rod (5). Install (5), (2) and (3), as in picture 1 first and then picture 2: use 2.5x2.5 wrench (D) to tighten. Step 4...
- Page 8 Install supporting plate (6). Install (6), (2) and (3), use 5x5 wrench (C) to tighten the screws (A). Step 5 Install control box (7) and control panel (9). Distance between desktop edge and supporting should be not more than 200mm. Install desktop with screw (F): use drill to tighten.
-
Page 9: Operation
Install baffle (8). Install (8) using 2.5x2.5 wrench (D) to tighten the screws (E). Connect all cables to the control box (7). Power port Port for cable Control panel connected to the lifting column OPERATION... -
Page 10: Troubleshooting
Height Adjust Function Press "▲" or "▼" to adjust the height. The LED display shows the current height. Height Memory Function Use "▲" or "▼" to set to the desired height. Press "M" to save the height and the screen will display " ";... -
Page 11: Specifications
If the LED display shows "E01" or "E02", wait 18 minutes and retry. If the “▼” button doesn't work, check the cable connection and disconnect power for at least 10 seconds, reconnect power and restart. If the issue persists, contact Kogan.com. SPECIFICATIONS... - Page 12 Maximum Load 70kg Maximum Speed 25mm/s Input Voltage 100-240V Lowest Position 710mm Highest Position 1210mm 1000-1600mm Desktop Size 500-800mm Working Environment 0–40°C IN THE BOX...
- Page 13 This is a Quick Start Guide and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions and features can be found online at help.kogan.com...