Related Manuals for Kogan SHANGRI-LA
Summary of Contents for Kogan SHANGRI-LA
- Page 1 VICTORIA VELVET BED DOUBLE/QUEEN SLVICVELDGA, SLVICVELQGA, SLVICVELDEA, SLVICVELQEA, SLVICVELDNA, SLVICVELQNA, SLVICVELDBA...
- Page 3 COMPONENTS A Headboard (x1) B Footboard (x1) C Side rail (x2) D Long slat (x1) E Bottom support (x2) F Leg (x4) G Short slat (x26) H Double-sided cap (x13) I Single-sided cap (x26) Hardware 1 30mm M8 screw (x8) 2 20mm M8 screw (x8) 3 25mm M8 screw (x4) 4 35mm M6 screw (x4)
- Page 4 ASSEMBLY Step 1: Align the two holes of the bracket on the side rail (C) with the end of the headboard (A). Insert and tighten a 30mm M8 screw (1) through each hole of the bracket using the Allen key (6). Once secured, attach the bracket on the other end of the side rail (C) to the footboard (B) the same way.
- Page 5 Step 2: Attach the legs (F) to the corners of the bed, securing them onto the headboard (A), footboard (B) and side rails (C) using the 20mm M8 screws (2) and Allen key (6). Step 3: Insert the long slat (D) into the headboard (A) and footboard (B). Secure by inserting and tightening 25mm M8 screws (3) using the Allen key (6).
- Page 6 Step 4: Align the holes on the bottom supports (E) under the holes marked on the vertical slat (D). Insert and tighten 35mm M6 screws (4) through the holes using the Allen key (6). Insert and tighten a M6 nut (5) on the underside of the bottom supports (E) using the wrench (7).
- Page 7 Step 5: Connect three short slats (G) using the single and double-sided caps (I, H) as shown below. This will create a slat assembly. Repeat this process until you have 13 slat assemblies. Place and align one slat assembly’s single and double-sided caps (I, H) onto the bed with the marked dots on the side rail (C) and long slat (D).
- Page 8 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...