Page 5
BEFORE ASSEMBLY A Phillips head screwdriver (not supplied) will be required to assemble this kitchen trolley. Runner and track sets Slide Runner Slide Track The user guide refers to multiple sets of metal Slide Runners and Slide Tracks (pictured above separately). To avoid any damage to these items during transportation, the Slide Runners and Slide Tracks have been pre-assembled together in pairs.
Page 6
Step 2: Gently press the plastic release lever on the Slide Runner while pulling the Slide Runner and Slide Track apart from each other. Step 3: The Slide Runner and Slide Track should now be separated. Repeat these steps for all remaining pairs of Slide Runners and Slide Tracks.
Page 8
Step 3: 6 (x1) 9 (x2) 11 (x2) Step 4: Using a Phillips head screwdriver, secure the left and right runners (10L, 10R) to parts K and L with four 12mm M3.5 screws (7). Secure parts K and L to parts M and N using four 35mm M3.5 screws (8). 7 (x4) 8 (x4) 10L (x1)
Page 9
Step 5: Insert four cam screws (13) into part J, then using a Phillips head screwdriver, insert four cam locks (12) into both parts K and L. Align part J with both parts K and L. Ensuring the arrows on the cam locks (12) are pointing towards the corresponding cam screws (13), secure the cam locks (12) into the cam screws (13) to connect part J to parts K and L.
Page 16
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...