Advertisement
Quick Links
Models:
MTB28
Refractory
This refractory kit is intended for use with the AVEO Series gas appliances. Check with your local building code agency be-
fore you begin installation to ensure compliance with local codes, including the need for permits and follow-up inspections. If
you encounter any problems regarding code approvals, or if you need clarifi cation of any of the instructions contained here,
contact your Hearth & Home Technologies Inc. dealer. For the dealer nearest you, please visit www.heatilator.com.
CAUTION
Sharp Edges
•
Wear protective gloves and safety
glasses during installation.
Note: An arrow ( ) found in the text signifi es change in content.
Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08
Installation
Instructions
!
WARNING
Hot Surfaces
•
Install this refractory only after the appliance
has cooled and the gas and electricity have
been shut off.
1
Advertisement
Related Manuals for Heatilator MTB28
Summary of Contents for Heatilator MTB28
- Page 1 Hearth & Home Technologies Inc. dealer. For the dealer nearest you, please visit www.heatilator.com. Note: An arrow ( ) found in the text signifi es change in content.
- Page 2 Remove D-cell batteries from the battery pack. B. Remove Screen & Glass from Appliance • See appliance owner’s manual. Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...
- Page 3 F. Remove Pilot Shield • Remove the two screws holding the pilot shield and remove the shield (Figure 1.8). Figure 1.5 Rotate and Remove Left Log Figure 1.8 Remove Pilot Shield Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...
-
Page 4: Install Refractory
Fold the left side of the refractory as shown in Figure 2.3. Figure 2.1 Refractory • Fold the right side of the refractory as shown in Figure 2.2. Figure 2.3 Fold Left Side Figure 2.2 Fold Right Side Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08... - Page 5 Figure 2.6 Install Screws • Install the refractory in the appliance as shown in Figure 2.5. Figure 2.7 Install Screws Figure 2.5 Install Refractory in Appliance Figure 2.8 Install Screws Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...
- Page 6 Place the right log. • Fasten with two screws (Figures 3.2 and 3.3). Figure 3.5 Replace Screw-Left Log Figure 3.2 Replace Right Screw-Right Log Figure 3.3 Replace Left Screw-Right Log Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...
- Page 7 Replace the left screw (Figure 3.7). Figure 3.7 Replace Left Screw-Front Log Figure 3.6 Replace Right Screw-Front Log F. Replace Screen & Glass in Appliance • See appliance owner’s manual. Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...
- Page 8 This page intentionally left blank. Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08...