Barco ClickShare CSE-200+ User Manual page 53

Problem
After inserting the Button into your
laptop, you cannot find the
ClickShare drive.
Some programs of Windows are
not shown on the display.
Barco knowledge base and YouTube videos
Go to the product page on Barco's website and select in the right column Support. You will get access to
Barco's Knowledge base and Latest tutorial videos. For more YouTube videos, consult
com/user/barcoTV and select ClickShare.
Cause
The Button's software is not
compatible with that of the Base
unit
Wallpaper is disabled
No automatic refresh of drives.
Bad connection at USB port on
laptop.
Windows tries to assign the
ClickShare drive to an already
reserved drive letter
IT policy not mount USB drives
Use of overlays, 3D or hardware
acceleration in the GPU.
Troubleshooting
Solution
Re-pair and update the software of
the Button by inserting it in the
front USB port of Base Unit.
If you connect a Button and start
sharing, the content should be
shown.
Refresh the view on your laptop.
• Reconnect to the USB port.
• Try another USB port.
• Reboot your laptop.
Use Microsoft Windows Disk
Management to assign it to a free
drive letter.
Contact your IT responsible.
• Disable overlays or hardware
acceleration in the GPU.
• Disable AeroGlass in Windows
7
• Capture mode
https://www.youtube.
R5900086 /07 ClickShare CSE-200+ 53