16
Measuring the system leakage current
NOTE
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ber 2001 (preferred measuring method)
Fig. 2:
•
Perform measurement configuration according to
(1/Fig. 2 / p. 16)
•
Perform measurement and repeat measurements.
•
Document the measured values in the "Leakage current test protocol",
rent measurement / p.
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ARCADIS Varic
Perform the system leakage current measurement only if the line
voltage on the ARCADIS Varic system must be adapted to the local
line voltage.
See
also
measurement / p. 10)
Measuring circuit for measuring the system leakage current according to the differential
current method
is not available in ARCADIS Varic.
41).
SPR2-310.815.01.05.02
02.05
(Notes
on
equivalent
(Fig. 2 / p.
Page 16 of 48
CS SD 24
General Start-up
leakage
16). Application part
(Leakage cur-
Siemens AG
Medical Solutions
0
current
0