Power Unit (Lamp) - Sony VPL-FH65 Service Manual

1-6-13. Power Unit (Lamp)

VPL-FH65/F630H/F635H
!\ Duct (BALLAST TOP)
!] Open the slide clamp and remove the harness.
A
!' Harness
To the power unit
(G board)
!; Open the wire saddle
and remove the harness.
To the C board
VPL-FH60/F530H/F535H
!\ Duct (BALLAST TOP)
!] Open the slide clamp and remove the harness.
A
!' Harness
To the power unit
(G board)
!; Open the wire saddle
and remove the harness.
To the C board
1-24 (E)
!, Blacket (BALLAST)
!. Two screws
(BVTP3 12)
@= Power unit
(lamp)
A
@/ Holder (BALLAST B)
@- Harness
!= Four screws
(PSW3 8)
![ Ballast
9 Two screws
6 Harness
!, Blacket (BALLAST)
!. Two screws
(BVTP3 12)
@= Power unit
(lamp)
A
@/ Holder (BALLAST A)
@- Harness
1 Remove the two clampers.
2 Remove the four harnesses.
!- Harness
To the lamp
connector
(BVTP3 12)
0 Power unit
(G board)
3 Three screws (PSW3 8)
4 Bracket (C B)
7 Screw
(PSW4 8)
8 Two screws
(BVTP3 12)
To the
C board
To the AC inlet
5 Harness
VPL-FH60