Writing Of Main/Prism/3Dgamma (Uf Level); Vcs Gain Data - Sony VPL-FH65 Service Manual

2-5-6. Writing of Main/Prism/3DGamma (UF Level)/LookUpTable (CS)/Chiral/GCFB/

VCS Gain Data

1. Connect the power cord and set this unit to standby state.
2. Press the [I/O] button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess3.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Write to Projector on the Read/Write pull-down menu.
6. Select the data type (Main/Prism/3DGamma (UF Level)/LookUpTable (CS)/Chiral/GCFB/VCS Gain)
on the Data Type pull-down menu.
7. Click the [Next] button.
8. Click the [Browse...] button.
The file selection window is displayed.
9. Set the destination file for the obtained data.
10. Click the [Next] button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
12. Click the [Next] button.
The window displaying the file path, model name written in file, unit serial, serial number model
name of this unit, and serial number is displayed.
13. Click the [OK] button.
The writing starts. Completed is displayed after completed.
14. Press the [I/O] button and set this unit to standby state.
15. Disconnect the power cord from this unit.
16. Click the [Complete] button.
VPL-FH60
2-17 (E)