Related Manuals for Exor JSmart700M Series
Summary of Contents for Exor JSmart700M Series
- Page 1 User’s Manual for JSmart700M Series Touchscreen Products JSmart700M Series Operating Instructions...
- Page 2 MANUGENJSMART7xxMW - Version 1.00 © 2022 Exor International S.p.A. – Verona, Italy Subject to change without notice The information contained in this document is provided for informational purposes only. While efforts were made to verify the accuracy of the information contained in this documentation, it is provided “as is”...
-
Page 3: Table Of Contents
Table of Contents Introduction Safety Guide 1 Product Overview 2 Standards and Approvals 3 Technical Specifications 4 Technical Data 4.1 Dimensions 4.2 Installation Environment and Procedure 4.3 Safety instruction 5 Connections 5.1 Ethernet Port 6 Power Supply, Grounding and Shielding 7 Battery 8 Special Instruction for Use 9 Getting Started... -
Page 4: Introduction
Introduction This Operating Instructions manual contains information regarding installation, transportation, storage, use and maintenance of HMI devices. Following product models are covered by this manual: Model Part Number Description HMI 7” TFT, 1024x600, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, JS707GB2U5P1 JSmart707M NFC, JMobile runtime... -
Page 5: Safety Guide
Safety Guide The manual contains safety standards that must be respected for the personal safety and to avoid damage. Indications of attention are divided into three levels of severity: DANGER: indicates a failure to observe safety rules and such failure may cause death or serious injuries. DANGER ATTENTION: indicates a failure to observe safety rules and that deficiency may cause damage. -
Page 6: Product Overview
1 Product Overview JSmart700M products are ideal for field installation in critical areas. High-resolution displays and multitouch PCAP touchscreen with a robust glass front; touchscreen/display bonding for fidget optical performance. Power-over-Ethernet (PoE) for maximum simplicity of connection using standard CAT5 wiring. The availability of a Wi-Fi interface enhances the device integration, while the NFC broadens the device ap- plications. -
Page 7: Standards And Approvals
2 Standards and Approvals The products have been designed for use in an industrial environment in compliance with the 2014/53/EU Directive. The products have been designed in compliance with: EN 61000-6-4 EN 61000-6-2 EN 61000-6-3 EN 61000-6-1 ETSI EN 301 489-1 ETSI EN 301 489-3 ETSI EN 301 489-17 ETSI EN 300 328... - Page 8 An example of the information reported is shown below: product model name JSmart707M year/week of production 2127 serial number AA00011FV000000561AA manufacturer address Exor International S.p.A. Via Monte Fiorino 9 IT-37057 San Giovanni Lupatoto (VR)
-
Page 9: Technical Specifications
3 Technical Specifications Touchscreen technology Projected capacitive - Multitouch Back-up battery 3V 7mAh Vanadium-Lithium, rechargeable, not user-replaceable, model VL1220. Flash Hardware clock Clock/Calendar with back-up battery Accuracy RTC (at 25°C) <100ppm Environmental conditions Operating temperature (surrounding -20 ÷ +55°C (vertical installation) EN 60068-2-14 air temperature) Storage temperature... - Page 10 3 Technical Specifications Durability information Backlight service life 40000 Hrs. or more (LED type) (Time of continuos operation until the brightness of the backlight reaches 50% of the rated value when the surrounding air temperature is 25°C. Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight quality/reliability/durability.) Viewing angles...
- Page 11 3 Technical Specifications Surface resistance Chemical resistance of the front glass for an exposure time of 24 hours without visible changes: • Betadine (10% Povidone Solution) • Cola • Electrode Gel/Paste • Hydrogen Peroxide (3% Solution) • NaCl (0.9% Solution) •...
- Page 12 Projected capacitive touch screens (PCAP) are suitable for operation with or without gloves. A large number of gloves (rubber gloves, light/heavy leather gloves, disposable latex gloves, etc.) are sup- ported. Due to the variety of commercially available gloves, however, EXOR cannot guarantee all types.
-
Page 13: Technical Data
4 Technical Data Model JSmart707M JSmart710M JSmart715M Display / Backlight TFT Color / LED TFT Color / LED TFT Color / LED Colors Resolution 1024X600 1280X800 1366X768 Diagonal (inches) 7” widescreen 10.1” widescreen 15.6” widescreen Direction L / Direction R Direction L / Direction R Direction L / Direction R Viewing angles horizontal... - Page 14 4 Technical Data Model JSmart721M Display / Backlight TFT Color / LED Colors Resolution 1920X1080 Diagonal (inches) 21.5” widescreen Direction L / Direction R Viewing angles horizontal Typ. 89° Direction U / Direction D Viewing angles vertical Typ. 89° Dimming 64-bit RISC Quad core - 1.6 GHz Operating System Linux...
-
Page 15: Dimensions
4 Technical Data 4.1 Dimensions MODEL JSmart707M 131.6mm/5.18” 195.2mm/7.68” 16,5mm/0.64” 17mm/0.66” JSmart710M 183.1mm/7.20” 264.5mm/10.41” 16,5mm/0.64” 17mm/0.66” JSmart715M 248mm/9.76” 398.6mm/15.69” 26,5mm/1.04” 17mm/0.66” JSmart721M 325.6mm/12.81” 534.1mm/21.02” 26,5mm/1.04” 17mm/0.66”... - Page 16 4 Technical Data Rear view...
-
Page 17: Installation Environment And Procedure
4 Technical Data 4.2 Installation Environment and procedure Avoid prolonged exposition to direct sunlight to avoid the risk of overheating the device. The equipment is not intended for installation in contact with corrosive chemical compounds. Check the resistance of the front panel to a specific compound before installation. Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel. -
Page 18: Safety Instruction
4 Technical Data 4.3 Safety instruction For all installation notes, please refer to the Installation Guide provided with the product. -
Page 19: Connections
5 Connections 5.1 Ethernet Port Pin Description Reserved The Ethernet port have two status indicators. Please see description in figure. Green ON: No activity OFF: Valid link has NOT been detected BLINKING: Activity ON: Valid link has been detected... -
Page 20: Power Supply, Grounding And Shielding
6 Power Supply, Grounding and Shielding The power supply terminal block is shown in the figure below. Use a shielded CAT 5 cable or higher Note: Ensure that the power supply has enough power capacity for the operation of the equipment. The unit must always be grounded to earth with shielded CAT 5 cable. -
Page 21: Battery
7 Battery These devices are equipped with rechargeable Lithium battery, not user-replaceable. The following information is maintained by the battery: • hardware real-time clock (date and time) Charge: At first installation must be charged for 48 hours. When the battery is fully charged, it ensures a period of 3 months of date and time back-up at 25°C. Battery Fig. - Page 22 7 Battery Fig. 7.3: JSmart715M Fig. 7.4: JSmart721M ATTENTION Dispose of batteries according to local regulations. ATTENTION This device cannot be disposed of as a domestic waste but according to WEEE European Directive 2012/19/EU...
-
Page 23: Special Instruction For Use
8 Special Instruction for Use - The equipment shall only be used in an area of not more than pollution degree 2, as defined in IEC/EN 60664-1. - The equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 in accordance with IEC/EN 60079-15. -
Page 24: Unpacking And Packing Instructions
10 Unpacking and Packing Instructions Fig. 10.1: JSmart707M, JSmart710M Fig. 10.2: JSmart715M, JSmart721M To repack the unit, please follow the instructions backwards.
Need help?
Do you have a question about the JSmart700M Series and is the answer not in the manual?
Questions and answers