Advertisement
Read This Before Operating The Crusher
DO NOT RETURN THE CRUSHER MACHINE TO THE RETAIL STORE WHERE PURCHASED.
Heater Sports is dedicated to your customer satisfaction. If you experience any trouble with the operation of
the Crusher Pitching Machine contact us at: (800) 492-9334 or log on to our website at:
The accuracy of the Crusher Portable Pitching Machine depends on the quality of the balls used.
Heater Sports recommends only using official Crusher balls in your Crusher Portable Pitching Machine.
These balls are incredibly accurate, long lasting, and produce the fastest ball speed.
THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY!
KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL ENTRY AND EXIT! SERIOUS HAND, EYE, AND BODILY
•
Please be sure to read all of the instructions before using the Crusher Portable Pitching Machine to insure
the machine is working properly.
•
Parents: Your child should be made aware of the potential dangers when using the Crusher Portable
Pitching Machine.
•
Never put your fingers into the Crusher while it is operating.
•
The Crusher is not a toy and an adult should supervise children. It is very important that the batter make
sure the area is clear before swinging bat.
•
Stay clear of the ball opening while the Crusher is operating. Although the balls are very light, they are
made of hard plastic, and eye damage or other injury may occur. Children must be advised of this danger
and appropriate precautions should be taken.
DO NOT use any type of ball other than the Crusher balls provided, such as regular golf ball or softer-type
•
ball. The used of one of these balls may result in jamming the Crusher and leaving it inoperable.
Occasionally a ball will not fall properly. DO NOT LOOK INTO
•
THE FRONT HOLE WHILE THE CRUSHER IS RUNNING to see where it is. The following ball may push it
out and cause eye injury. If the next ball does not push it through, then turn the Crusher off before
attempting to find the ball. You should be able to dislodge the ball easily by tilting the Crusher forward to
eject the ball.
Model# CR99
CALL TOLL FREE: (800) 492-9334.
CUSTOMER SERVICE
www.HeaterSports.com.
CRUSHER BALL RECOMMENDATION
WARNING:
INJURY MAY OCCUR IF USED INCORRECTLY!
®
Advertisement
Table of Contents
Related Manuals for Heater Sports CRUSHER CR99
Summary of Contents for Heater Sports CRUSHER CR99
- Page 1 CALL TOLL FREE: (800) 492-9334. CUSTOMER SERVICE Heater Sports is dedicated to your customer satisfaction. If you experience any trouble with the operation of the Crusher Pitching Machine contact us at: (800) 492-9334 or log on to our website at: www.HeaterSports.com.
- Page 2 CRUSHER PARTS LIST Ball Feeder Part P: Spin Top Push Pin Qty: 1 Qty: 6 Part Q: Leg Boot Qty: 3 Bottom Leg Housing Tripod Middle Back Leg Middle Front Leg Qty: 3 Qty: 1 Qty: 1 Qty: 1 Qty: 2 Lock Washer Tripod Clamp Flat Washer...
- Page 3 STEP 2: Insert Bottom Leg Assemblies (E) in to Middle Back Legs (D) and Middle Front Leg (C) Back of Tripod Front of Tripod Front View Side View CRUSHER ASSEMBLY Machine Bolt (M) Attachment Stabilizer Tripod Attachment Bolt (L) Machine Bolt (M) Machine Stabilizer Inset Nut Tripod Attachment (K)
- Page 4 NOTE: MAKE SURE TO FACE THE MACHINE OPENING OVER THE FRONT LEG OF THE TRIPOD. THE TRIPOD WILL LEAN BACK AS STEP 7: Slide the housing bolt through the Tripod (B) hole. THIS GIVES THE MACHINE THE PROPER BALANCE. replace the Washer, Lock Washer, Knob in that order and Then, then tighten.
Need help?
Do you have a question about the CRUSHER CR99 and is the answer not in the manual?
Questions and answers