DESCRIPTION OF THE MACHINE OPTIONAL click Handle ON/OFF switch Detergent tank Water outlet High pressure hose Lance 8a Nozzle 8b Turbo nozzle 8c Detergent nozzle Electric cable 10 Water inlet + filter+ Quick hose fitting...
Page 3
ASSEMBLY INSTRUCTIONS click click click click Depending on the model, there are differences in the scopes of delivery.
Page 4
Optional ON I 5÷40°C Optional 1/2 inch 13 mm 1 min click...
Translation of the original instructions INDEX .................PAG. SAFETY PRECAUTIONS PICTURES ..............1-7 GENERAL INFORMATION..........8 SYMBOLS ................. 8 > WARNINGS SAFETY PRECAUTIONS ..........8 USAGE ................9 • 0 1WARNING: This appliance is for outdoor use PUT INTO SERVICE / STARTING UP ......11 only.
Page 9
(it is extremely important to protect these • WARNING: Water that has flown through back- components against damage by avoiding their flow preventers is considered to be non-potable. • X X WARNING: the machine shall be disconnect- improper use and protecting them against bending, knocks and scratches).
Page 10
The cleaner can only be connected to the water construction. mains if the water mains is separated by a back- Information for supply may also be obtained flow preventer. Make sure that the hose is at least Ø from the plug manufacturer. 13mm-1/2 inch and that it is reinforced.
Page 11
The plug must NOT be used if the cover is omitted - Lock the lever on the trigger gun. or lost until a replacement is obtained. - Make certain that only the correct fuse cover is Operation used and fitted. See fig.
- Please check that the coupling of the high of more serious leakage, you should contact the pressure hose with the appliance and the gun authorized customer service. supplied as standard equipment made correctly, Replacement parts - Use only original spare parts or spare parts that is to say without any water leak.
Page 13
WARRANTY CONDITIONS • SIP warrants its products for 12 months • This warranty shall not be valid if: from the date of purchase. a) previous service or repairs were per- formed by unauthorized • In accordance with the above-mentio- ned terms, SIP agrees to furnish free of individuals or companies.
EN 50581 61000-3-3: EN 61000-3-3:2013 EN 55014-1:2006+A1:2009+A2:2011 EN 60335-2-79 EN 55014-2:2015 EN 60335-1 EN 61000-3-3:2014. EN 61000-3-3:2013. Name: Mr Paul Ippaso The technical file is kept at: Position: Director SIP Industrial Products Ltd Loughborough Leicestershire LE12 9NH UK (02/2019) 7.700.0535-00...
Page 15
BS EN 62233:2008 BS EN 50581 BS EN 55014-1:2006+A1:2009+A2:2011 BS EN 55014-2:2015 BS EN 61000-3-2:2014. BS EN 61000-3-3:2013. The technical file is kept at: Name: Mr Paul Ippaso Position: Director SIP Industrial Products Ltd Loughborough Leicestershire LE12 9NH UK (02/2019) 7.700.0535-00...
Need help?
Do you have a question about the CW2000 and is the answer not in the manual?
Questions and answers