Casio fx-9860G SD User Manual page 331

After setting all the parameters, use c to move the highlighting to "Execute" and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph.
Calculation Result Output Example
G
.......................... direction of test
1 2
F
..................................
p
.................................. p-value
o
................................. mean of sample 1 (Displayed only for Data: List setting.)
1
o
................................. mean of sample 2 (Displayed only for Data: List setting.)
2
x
............................ standard deviation of sample 1
1 n -1
x
............................ standard deviation of sample 2
2 n -1
n
................................. size of sample 1
1
n
................................. size of sample 2
2
You can use the following graph analysis functions after drawing a graph.
• 1(F) ... Displays
Pressing 1(F) displays the
corresponding location in the graph (unless the location is off the graph screen).
Two points are displayed in the case of a two-tail test. Use d and e to move the pointer.
Press J to clear the
• 2(P) ... Displays p-value.
Pressing 2(P) displays the p-value at the bottom of the display without displaying the pointer.
Press J to clear the p-value.
# [Save Res] does not save the
line 2.
# V-Window settings are automatically
optimized for drawing the graph.
6-5-21
Tests
F
value
F
value.
F
value at the bottom of the display, and displays the pointer at the
F
value.
condition in
1
20050401
# Executing an analysis function automatically
F
stores the and p values in alpha variables
F and P, respectively.