Information According To Article 33 Of The Reach Regulation; Preparing For Disassembly; Dismantling The Motor - Siemens SIMOTICS SD SH 71 315 Series Operating Instructions Manual

Disposal

11.2 Information according to Article 33 of the REACH regulation

11.2 Information according to Article 33 of the REACH regulation
This product contains one or several subproducts in which the following substance –
belonging to the "list of candidates" – exists in a concentration exceeding 0.1 percent by
weight.
• CAS No. 7439-92-1, lead
Based on the currently available information, we assume that this substance does not
represent any risk when correctly used, including its disposal.
11.3

Preparing for disassembly

Disassembly of the motor must be carried out and/or supervised by qualified personnel with
appropriate expert knowledge.
1. Contact a certified waste disposal organization in your vicinity. Clarify what is expected in
terms of the quality of dismantling the motor and provision of the components.
2. Carefully follow the "5 safety rules" (Page 11).
3. Disconnect all electrical connections and remove all cables.
4. Remove all liquids such as oil and cooling liquids. Collect the liquids separately and dispose
of them in a professional manner.
5. Detach the motor fixings.
6. Transport the motor to a suitable location for disassembly.
11.4

Dismantling the motor

Dismantle the motor using the general procedures commonly used in mechanical
engineering.
Motor parts can fall
The motor is made up of heavy parts. These parts are liable to fall during dismantling. This
can result in death, serious injury or material damage.
• Before you release any motor parts, secure them so that they cannot fall.
114
WARNING
1LE7 shaft heights 71 ... 315
Operating Instructions, 04/2022, A5E51689275A-AA