3.3
Installation
The regulations and standards used as the basis for designing and testing this motor are
stamped on the rating plate. The motor design basically complies with the following
standards:
Table 3- 1
Feature
Dimensioning and operating behavior
Procedure for determining the losses and the efficiency of
rotating electrical motors and inspections
Degree of protection
Cooling
Type of construction
Dimensions of three-phase foot-mounted induction motors
Dimensions of three-phase flange-mounted induction motors
Terminal markings and direction of rotation
Starting characteristics of rotating motors
Vibration severity grades
Efficiency classification of three-phase squirrel-cage induction
motors
IEC standard voltages
Code of practice for earthing
Code of practice for installation and maintenance of induction
motors
For ratings with higher Si/Pn ratio than the specified values in IEC 60034-12 for NE design, refer to
*
the catalog.
1LE7 shaft heights 71 ... 315
Operating Instructions, 04/2022, A5E51689275A-AA
Applicable general regulations
3.3 Installation
Standard
EN / IEC 60034-1
IS 12615,
IS/IEC 60034-1
EN / IEC 60034-2-1
IS 12615
EN / IEC 60034-5
IS/IEC 60034-5
EN / IEC 60034-6
-
EN / IEC 60034-7
IS 2253
-
IS 1231
-
IS 2223
EN / IEC 60034-8
IS/IEC 60034-8
EN / IEC 60034-12
IS 12615
*
EN / IEC 60034-14
IS 12075
EN / IEC 60034-30-1
IS 12615
IEC 60038
IS 12360
-
IS 3043
-
IS 900
Description
19